American Standard Delancey 30 x 19-Inch Double Bowl Kitchen Sink Grid – Pack of 2 - AMS-8433000

These grids are made for the American Standard Delancey 30 inch x 19 inch double bowl cast iron kitchen sink, model 77DB30190.308. Each grid measures 14-3/8 x 14-3/16 x 1 inches (365 x 360 x 24mm), sized to the individual bowls of that sink. On any other sink, measure the bowl floor first; a grid that is close but not exact will rock or block the drain.

Two. The Delancey grid set ships as a pack of 2, one grid per bowl, which is what you need to cover both sides of a 30 x 19 double bowl sink. The orderable part number is 8433000.075 in stainless steel.

The Delancey grids are polished stainless but they do not sit metal-to-porcelain. Each grid rides on coordinating plastic feet with plastic side bumpers, so the contact points against the enameled cast iron bowl and side walls are plastic, not steel. That is the detail that matters if you are protecting a cast iron sink finish in a rental or a spec kitchen.

Yes. The 8433000.075 grid set is the matched accessory for the Delancey 30 x 19 double bowl cast iron sink (77DB30190.308), so it standardizes across every unit running that sink. Each pack covers one sink, both bowls. Feet and bumpers are plastic and are the wear items over time; the grid body itself is stainless.

Polished stainless steel, ordered as finish code 075. The plastic feet and bumpers are color coordinated to the grid rather than left raw, so it looks intentional sitting in the bowl.

About 1 inch. Each grid is 14-3/8 x 14-3/16 x 1 inches, so it lifts pots and dishes roughly an inch off the bowl floor. Worth knowing if you are stacking tall stockpots under a pull-down faucet.