Monterrey Top Mount Kitchen Faucet With Gooseneck Spout and Wrist Blade Handles 1.5 gpm/5.7 L/min Laminar Flow in Spout Base
- Laminar flow control in spout base. Plain spout end
- Field-convertible rigid/swivel gooseneck spout with 8" (203 mm) reach
- Washerless ceramic disc valves assure drip-free performance
- 1/2" (13 mm) male threaded inlet shanks with brass coupling nuts
- Vandal-resistant wrist blade handles with red and blue indicators
- 1.5 gpm/5.7 Lpm pressure-compensating flow regulator
- Less Spray
Manufacturer Resources
Product Specs
- Product Type:
- Kitchen Faucet
- Product Group:
- Kitchen
- Product Subgroup:
- Faucets
- Department:
- Plumbing
- Country of Origin:
- Mexico
- Product Color:
- Chrome
- Luxury/Non Luxury:
- Non Luxury
- Residential Commercial:
- Commercial
American Standard 6409180.002 – Frequently Asked Questions
1) Does the American Standard Monterrey 6409180 gooseneck kitchen faucet come with a side spray?
No side spray. The Monterrey 6409180 is a less-spray faucet with a plain spout end and laminar flow control built into the spout base, so there is no diverter or hose assembly to plumb. If your sink deck has a fourth hole from an old sprayer, you'll need a hole cover plate to close it off.
2) Can the Monterrey gooseneck spout be locked so it doesn't swing over the sink divider?
Yes. The gooseneck spout is field-convertible between rigid and swivel, so the same faucet can be set up to swing over a two-bowl sink or locked rigid where you don't want it moving. Spout reach is 8 inches (203 mm).
3) What size supply connections does the American Standard 6409180 faucet have?
The inlet shanks are 1/2 inch (13 mm) male threaded with brass coupling nuts included. That lets you connect standard 1/2 inch supply risers or flex connectors directly to the shanks without an adapter.
4) Is a 1.5 gpm kitchen faucet enough flow for a commercial breakroom or school sink?
The Monterrey 6409180 delivers 1.5 gpm (5.7 L/min) through a pressure-compensating flow regulator, so the rate stays consistent as building pressure fluctuates rather than surging on high-pressure risers. The laminar flow control in the spout base gives a non-aerated stream, which is what many healthcare and institutional specs call for. For pot filling in a kitchen that needs higher volume, a faucet at a higher gpm rating is the better choice.
5) Why wrist blade handles instead of standard lever handles on this faucet?
The Monterrey 6409180 uses vandal-resistant wrist blade handles with red and blue temperature indicators. Blades can be operated with a forearm or wrist rather than a grip, which is why they turn up in clinics, labs, and food prep areas. The vandal-resistant design also holds up better in public restrooms and shared breakrooms than a decorative lever.
6) How does the Monterrey 6409180 mount to the sink or counter?
It's a top mount (deck mount) faucet, installed down through the sink deck or countertop from above with the threaded shanks dropping through the holes. That's the difference from a wall mount or a concealed back-mount unit, so your deck needs to be pre-drilled for a deck faucet.
7) What finish and part number should I order for the American Standard Monterrey gooseneck kitchen faucet?
Order it in chrome, manufacturer part number 6409180.002. Chrome is the only finish this configuration is built in, which also makes it straightforward to standardize across a building where the rest of the fixtures are polished chrome.
8) Will this faucet drip after heavy daily use?
The valving is washerless ceramic disc, which is what holds up under high-cycle use in breakrooms and multi-family units. There are no rubber washers to compress and fail, and cartridge service is a swap rather than a reseat.
How fast can I get the American Standard 6409180.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 6409180.002 come with a warranty?
Absolutely. The American Standard 6409180.002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 6409180.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 6409180.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.