American Standard NextGen Sele...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$381.94
$372.73
American Standard NextGen Selectronic Touchless Faucet, Base Model, 0.5 gpm/1.9 Lpm - AMS-775B105

American Standard NextGen Selectronic Touchless Faucet, Base Model, 0.5 gpm/1.9 Lpm - AMS-775B105

(No reviews yet) Write a Review

Model: 775B105.002

In Stock (leaves warehouse same day if ordered before 3pm ET)

$381.94
$372.73
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
NextGen Selectronic Touchless Faucet, Base Model, 0.5 gpm/1.9 Lpm
  • POWER KIT MUST BE PURCHASED SEPARATELY
  • Touchless operation limits the spread of germs
  • Single inlet for cold or tempered water
  • Clean, integrated design. No control box below deck
  • Easy installation and maintenance: Faucet installs from the top. All serviceable parts are easily accessible
  • Auto Purge: Periodically purges stagnant water
  • Safety Timer: Automatically turns water off after 55 seconds
  • Vandal-resistant 0.5 gpm/1.9 Lpm pressure-compensating multi-laminar spray
  • Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available

Manufacturer Resources

Product Specs

Product Type:
Touchless Faucet
Product Group:
Kitchen
Product Subgroup:
Faucets
Department:
Plumbing

American Standard 775B105.002 – Frequently Asked Questions

1) Does the American Standard NextGen Selectronic touchless faucet come with a power supply?
No. The power kit is sold separately on the 775B105 NextGen Selectronic, so budget a second line item for it. Nothing in the faucet carton powers the sensor, and without the kit the faucet will not run. Decide up front whether the job wants battery or hardwired power, because that choice is made on the power kit, not on the faucet.
2) Can I use the 775B105 touchless faucet with both hot and cold supplies?
No. It is a single inlet faucet, fed with either cold or tempered water. If the fixture needs blended warm water, the mixing has to happen upstream, typically at a thermostatic mixing valve, and the faucet gets one tempered supply line. There is no deck mounted mixer on the base model.
3) Will the NextGen Selectronic faucet cover a 4-inch or 8-inch center deck?
Only with the optional deck plate. The faucet itself is a single hole fixture, and American Standard offers a deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers to cover existing three-hole prep. On a retrofit into an old widespread or centerset sink, order the plate at the same time or you will be looking at two open holes.
4) Do I need space under the sink for a control box with this Selectronic faucet?
No below-deck control box. The electronics are integrated into the faucet body, so there is nothing to mount inside a tight vanity or a wall-hung lavatory carrier. The faucet installs from the top of the deck, and the serviceable parts are reachable from above, which matters when you are working a stall-side sink with no room to get underneath.
5) What flow rate is this American Standard touchless faucet, and is the aerator vandal resistant?
It runs 0.5 gpm / 1.9 Lpm through a pressure-compensating multi-laminar spray, and the spray outlet is vandal resistant. Pressure compensating means the flow holds steady as building pressure swings, which is what you want across a row of lavatories on one riser. The 0.5 gpm rate is the common public restroom metering spec.
6) How long does the water run before it shuts off on its own?
A safety timer closes the valve after 55 seconds of continuous run. That caps a stuck-on sensor or a taped-over lens, which is the usual flood risk in a public restroom. There is also an auto purge that periodically cycles water through to clear stagnant water in the line, useful in buildings with low-use fixtures or Legionella management plans.
7) What finishes does the American Standard 775B105 NextGen Selectronic come in?
Two: polished chrome (775B105.002) and brushed nickel (775B105.295). Chrome is the usual choice when you are matching existing commercial restroom trim; brushed nickel suits hospitality and higher-finish multifamily work. The suffix on the model number is the finish code, so order by the full number to avoid getting the wrong one.
8) Is this the base model or does it have extra programming features?
This is the base model of the NextGen Selectronic line. You get touchless sensor operation, the 55-second safety timer, and auto purge for stagnant water. It is the straightforward spec for standardizing a floor of restrooms where you want hands-free operation without additional above-deck configuration.
How fast can I get the American Standard 775B105.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 775B105.002 come with a warranty?
Absolutely. The American Standard 775B105.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 775B105.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 775B105.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!