American Standard NextGen Sele...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$509.51
American Standard NextGen Selectronic Touchless Faucet, Base Model With SmarTherm Safety Shut-Off + ADM, 0.35 gpm/1.3 Lpm - AMS-775B303

American Standard NextGen Selectronic Touchless Faucet, Base Model With SmarTherm Safety Shut-Off + ADM, 0.35 gpm/1.3 Lpm - AMS-775B303

(No reviews yet) Write a Review

Model: 775B303.002

In Stock (leaves warehouse same day if ordered before 3pm ET)

$509.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
NextGen Selectronic Touchless Faucet, Base Model With SmarTherm Safety Shut-Off + ADM, 0.35 gpm/1.3 Lpm
  • POWER KIT MUST BE PURCHASED SEPARATELY
  • Touchless operation limits the spread of germs
  • SmarTherm safety shut-off prevents accidental scalding. ASSE 1070 certified
  • Above-deck mixing with removable handle
  • Dual inlets for hot and cold water
  • Clean, integrated design. No control box below deck
  • Easy installation and maintenance: Faucet installs from the top. All serviceable parts are easily accessible
  • Auto Purge: Periodically purges stagnant water
  • Vandal-resistant 0.35 gpm/1.3 Lpm pressure-compensating multi-laminar spray
  • Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available

Manufacturer Resources

Product Specs

Product Type:
Touchless Faucet
Product Group:
Kitchen
Product Subgroup:
Faucets
Department:
Plumbing

American Standard 775B303.002 – Frequently Asked Questions

1) Does the American Standard 775B303 touchless faucet come with a power supply?
No. The power kit for the NextGen Selectronic 775B303 has to be ordered separately, so budget for it on the same order. Without it the faucet won't operate, and it is the single most common thing left off a touchless faucet order.
2) Does the NextGen Selectronic faucet need a control box under the sink?
No below-deck control box. Mixing happens above the deck with a removable handle, and the faucet installs from the top, so under-sink clearance and access aren't an issue. That also means serviceable parts stay reachable without pulling the unit.
3) How does the 775B303 protect against scalding in a public restroom?
It uses SmarTherm safety shut-off, which stops flow before the water can reach a scalding temperature, and it is ASSE 1070 certified. For schools, healthcare and other facilities where a thermostatic mixing requirement is written into the spec, that certification is the line item to point at.
4) Will this faucet work on a single-hole deck or do I need 4-inch or 8-inch centers?
The NextGen Selectronic base model mounts as a single-hole faucet. For 4-inch (102 mm) or 8-inch (203 mm) center decks, an optional deck plate covers the extra holes and is ordered separately.
5) Does the 775B303 need both hot and cold supplies run to it?
Yes, it has dual inlets and mixes hot and cold above the deck. If your rough-in only has a tempered single supply, this is not the right model for that opening.
6) What flow rate does the American Standard 775B303 deliver, and will it meet a low-flow spec?
0.35 gpm (1.3 Lpm) through a vandal-resistant, pressure-compensating multi-laminar spray. Pressure compensation keeps that rate steady as building pressure swings, which is what makes it hold up in a multi-fixture restroom group.
7) How does this faucet handle stagnant water in a building with low use?
Auto Purge runs periodically to flush stagnant water out of the fixture. That matters in schools, hotels and healthcare wings where individual lavatories can sit unused for long stretches.
8) What finishes does the NextGen Selectronic 775B303 come in?
Two: chrome (775B303.002) and brushed nickel (775B303.295). If you are standardizing a floor of restrooms, order by those part numbers to keep the trim matched.
How fast can I get the American Standard 775B303.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 775B303.002 come with a warranty?
Absolutely. The American Standard 775B303.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 775B303.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 775B303.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!