American Standard Ravenna Pedestal Leg - AMS-41000

The Ravenna 41000 is the pedestal leg by itself, the column that supports the lavatory. The basin is a separate order. The leg does ship with its mounting kit, so you are not sourcing anchors separately, but you still need the matching Ravenna bowl to complete the fixture.

The Ravenna pedestal sink stands 34 inches (864 mm) high at nominal dimensions, with a footprint of 24-1/4 by 20 inches (616 x 508 mm). That 34 inch rim height is the number to check against your supply and drain rough-in before you set the leg.

That is what the column is for. A pedestal leg like the Ravenna conceals the trap and stops on a wall-hung style bowl and carries part of the load to the floor. If you need clear knee space under the bowl or full access to the trap for maintenance, a wall-hung lavatory with exposed supplies or a vanity is the better choice, since a pedestal blocks the floor area directly under the basin.

Plan on a 24-1/4 by 20 inch nominal footprint for the fixture. In a tight powder room or an ADA-path corridor, measure the 20 inch dimension out from the finished wall, since the pedestal column sits on the floor and cannot be trimmed back.

White only, ordered as part number 41000.02. If you are matching other fixtures in a washroom, the Ravenna leg is a single-finish item, so the coordination question is really about the bowl and faucet rather than the pedestal.

An integral mounted towel bar is offered as an option on the Ravenna, so it is a decision you make at order time rather than a field add-on. The basin itself also carries a faucet ledge with shelf area and a separate soap or accessory ledge.