American Standard Serin Touchl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$738.67
$688.67
American Standard Serin Touchless Wall-Mount Trim, Battery-Powered, 0.5 gpm/1.9 Lpm - AMS-T064355

American Standard Serin Touchless Wall-Mount Trim, Battery-Powered, 0.5 gpm/1.9 Lpm - AMS-T064355

(No reviews yet) Write a Review

Model: T064355.295
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$738.67
$688.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Serin Touchless Wall-Mount Trim, Battery-Powered, 0.5 gpm/1.9 Lpm
  • Includes 4-Year CR-P2 lithium battery
  • R350 rough valve must be purchased separately
  • Touchless operation limits the spread of germs
  • Sensor in spout tip for streamlined style and reduced vandalism
  • Self-adjusting sensor automatically sets range for optimum performance
  • Adjustable Spout Reach: Easily adjustable from 6-inch (152 mm) – 9-inch (229 mm)
  • Vandal-resistant brass spout
  • Single inlet for cold or tempered water
  • Safety Timer: Automatically turns water off after 55 seconds
  • Vandal-resistant 0.5 gpm/1.9 Lpm pressure-compensating multi-laminar spray

Manufacturer Resources

Product Specs

Product Group:
Commercial
Product Subgroup:
Faucets
Product Type:
Wall-Mount Trim
Department:
Plumbing

American Standard T064355.295 – Frequently Asked Questions

1) Does the American Standard Serin touchless wall-mount faucet come with the rough-in valve, or do I order that separately?
Trim only. The Serin touchless wall-mount faucet requires the R350 rough valve, which is a separate purchase. Budget both lines on the job: the trim is what you see on the wall (spout, sensor, electronics), and the R350 is the in-wall valve body it mounts to. Ordering the trim alone leaves you without a way to connect the supply.
2) How far does the spout on the Serin touchless wall-mount faucet project from the wall?
Spout reach adjusts from 6 inches (152 mm) to 9 inches (229 mm), so you can set projection on site to clear the lavatory rim rather than being locked to one dimension. That range is useful on retrofits where the existing wall penetration and bowl position weren't set for the new faucet.
3) Can I run hot and cold to this faucet and mix at the spout?
No. The Serin touchless wall-mount trim has a single inlet, for cold or tempered water only. If you want warm water at the lavatory, the tempering has to happen upstream, at a thermostatic mixing valve feeding the supply. There is no mixing handle or hot inlet on the faucet itself.
4) Does this touchless faucet need power run to it, or does it run on a battery?
Battery powered, and the CR-P2 lithium cell is included and rated for 4 years of service. That means no electrical rough-in at the lavatory, which is why this trim gets specified in restroom retrofits where pulling a circuit to each fixture isn't practical.
5) What flow rate is the Serin touchless wall-mount faucet, and will it hold that flow across varying building pressure?
It flows 0.5 gpm (1.9 Lpm) through a pressure-compensating multi-laminar spray, so the rate stays consistent as supply pressure changes floor to floor. The 0.5 gpm outlet is the low-flow lavatory rate commonly specified for public restrooms.
6) What keeps a sensor faucet from running continuously if someone blocks the sensor in a public restroom?
A safety timer shuts the water off automatically after 55 seconds of continuous run. On the Serin touchless trim the sensor also sits in the spout tip rather than on a separate escutcheon, and both the spout and the spray outlet are vandal-resistant, which matters in schools, transit, and high-traffic public facilities.
7) What finish and part number do I quote for the Serin touchless wall-mount trim?
Brushed Nickel, part number T064355.295. That is the finish to match against existing brushed nickel trim on adjacent openings; specify the R350 rough valve on the same order since the trim does not include it.
8) Does the sensor need to be calibrated after installation?
No calibration step. The sensor is self-adjusting and sets its own detection range once installed, so it compensates for the reflectivity and position of the bowl below it. That is worth knowing if you're standardizing across a floor of restrooms with different lavatory colors and depths.
How fast can I get the American Standard T064355.295 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard T064355.295 come with a warranty?
Absolutely. The American Standard T064355.295 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard T064355.295?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard T064355.295 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!