American Standard Studio Skirted Chair Height Elongated Bowl With Seat - AMS-3075120

The Studio Skirted elongated bowl sits at a 16-1/2 inch (419mm) rim height, which is the chair height range builders and property managers spec for easier sit-to-stand. Measure your own required seat height with the seat installed, since the 16-1/2 inch figure is the rim.

The seat is included. Model 3075120.02 is sold as a combination dual flush bowl with seat, so for a multi-unit rollout you are not chasing a separate seat line item.

It flushes at 1.28 gpf (4.8 Lpf), an ultra-low consumption rate that uses 20 percent less water than a standard 1.6 gpf fixture and meets EPA WaterSense criteria. That matters if your jurisdiction or a green building program requires WaterSense fixtures.

Yes, it is a dual flush bowl, so users pick a reduced flush for liquid waste and a full flush otherwise. Combined with the PowerWash rim, which scrubs the bowl on every flush, it is built to hold performance at the lower 1.28 gpf volume.

A skirted trapway means the bowl's exterior is a smooth continuous side rather than the exposed contoured trapway on a conventional two piece, so there is no channel to wipe around. Paired with the EverClean surface, which inhibits growth of stain and odor causing bacteria, mold and mildew on the glazed finish, that cuts cleaning time in hospitality and multi-family turns.

The trapway is 2-1/8 inches and fully glazed end to end. A fully glazed passage of that diameter is what you want in commercial and multi-family settings where clogs from heavy paper use drive service calls.

Yes. The Studio Skirted elongated bowl is styled to coordinate with both Studio and Boulevard bathroom sinks, so it is the right pick when you are standardizing an existing suite across units.

Elongated. That gives roughly two extra inches of bowl length over a round front, which is the standard choice for commercial and accessible restrooms but needs checking against a tight water closet stall depth before you order.