American Standard Urinal Inlet Spud - AMS-47003

The inlet spud is the fitting that connects the flush valve outlet to the urinal's inlet opening at the top of the fixture. On the American Standard 47003, it's a repair part, not a whole valve, so it's what you order when the connection at the urinal is leaking or the original spud is corroded and the flush valve itself is still good.

Urinal only. American Standard lists the 47003 spud under urinal application, so don't plan it into a water closet repair, where the inlet connection is a different size.

The manufacturer part number is 047003-0070A. That's the number to quote when you're matching an American Standard urinal spud for a facility repair, and it's a single offering with no finish variants to choose between.

That's exactly what it's built for. The 47003 is carried as a repair part rather than a fixture component, and at 0.335 pounds it's a cheap, small item to keep a few of on the shelf for a multi-fixture restroom where one spud connection eventually weeps. Match the American Standard urinal model you have before you standardize on it across the building.

There's one version of the 47003 and it carries no decorative finish option. It's a functional repair fitting that sits at the urinal inlet behind or above the fixture line, so finish selection isn't part of the order.

The 47003 measures 10.433 x 4.1 x 1 inches and weighs 0.335 pounds. Those numbers are the packaged part, so use the 1 inch figure as your guide on the narrow dimension when you're working a tight chase or a back-to-back urinal wall.