NUVO Lighting 64-131 Dimension Pro, Tape light strip, 32ft, Hi-Output, RGB + Tunable White, Plug connection, Starfish IOT Capable, IR Remote Incl.

No. The Dimension Pro 64-131 tape light is rated for dry locations and indoor use only. Keep it out of bathrooms with active shower moisture, covered exteriors, coolers, and anywhere subject to condensation. For a soffit, canopy, or bath application you need a wet- or damp-rated tape product instead.

It ships as a complete kit: the tape reel, a plug-in driver, the controller/receiver, and an IR remote. No separate driver, transformer, or controller purchase is needed. The driver plugs into a standard receptacle, so you do need an accessible outlet near the run; there is no hardwire junction connection on this one.

The tape dims, but not from a line-voltage wall dimmer. It runs at 24V off the included plug-in driver, and dimming plus color changing happen through the bundled controller and IR remote, or through the Starfish app since the kit is Starfish IOT capable. Putting a TRIAC wall dimmer upstream of the plug-in driver is not how this one is controlled.

The reel is 393.70 inches, which is the 32 ft run, and the tape itself measures 0.47 inch wide. That narrow profile lets it tuck into a cove, under a cabinet lip, or inside an aluminum channel. Total kit weight is 1.67 lbs, so mounting is simple adhesive or channel work rather than structural support.

At 3080 lumens over the 32 ft run drawing 30W, the Dimension Pro Hi-Output tape does real task-level work under cabinets or in a cove, not just color wash. Color rendering is 80+ CRI, which is fine for kitchens, retail display, and hospitality accent, though a color-critical application (paint matching, medical) wants 90+ CRI.

It is RGB plus tunable white, so white output is adjusted across the tunable range from the remote or app rather than being locked to one factory CCT. There is no CCT selector switch on the product. If a facility standard requires every fixture set to one fixed Kelvin out of the box, a fixed-CCT tape is the cleaner spec.

It carries a cETLus safety listing, covering both US and Canadian requirements, and the product is RoHS compliant. One thing to flag for spec packages: the product is identified as containing lead under California Prop 65, so a Prop 65 notice applies where that matters.

No. The LEDs are integrated into the tape, so there is no lamp to change. Rated life is 50,000 hours, and at end of life the tape run itself gets replaced. Housing material is plastic, which is why it flexes around cove corners but should not be run where it sees heat or abrasion.