NUVO Lighting 65-822R1 8 Foot, Vapor Proof Linear Fixture, CCT & Wattage Selectable, IP65 and IK08 Rated, 0-10V Dimming, 120V-347V

Yes. The 65-822R1 is a universal-input driver rated 120V through 347V, so the same fixture works on 120V single phase, 277V in a commercial 480/277 system, and 347V Canadian service. No separate voltage version to specify.

It is a wet location rated outdoor fixture, IP65 sealed against hose-directed water and IK08 rated for impact. That covers wash bays, parking garages, food processing areas, coolers, and covered exterior walkways. IP65 is dust tight and water jet resistant, not submersible, so do not use it where it can be flooded.

Wattage is field selectable at 50W, 60W, or 72W, with output ranging 6400 to 9360 lumens across those settings. Color temperature is selectable as well. That lets you stock one 8 foot fixture and tune it per space instead of ordering three different SKUs.

The housing measures 94.49 inches long, 4.33 inches wide, and 3.46 inches high, so it occupies about the same run as a standard 8 foot strip but is much narrower than a two-lamp fluorescent wrap. Check your existing mounting hole spacing and the clearance above, since the fixture is only 3.46 inches deep. It can be surface mounted to wall or ceiling.

Yes, the driver is 0-10V dimmable, so it ties into a standard low voltage dimming control or an occupancy and daylight harvesting system. You run the two dimming conductors separately from line power; the control is not supplied with the fixture.

No. The 65-822R1 uses integrated LED boards, not replaceable tubes, so there is nothing to lamp at install. Rated life is 50,000 hours, and when the LED package reaches end of life the fixture is replaced rather than relamped.

The 65-822R1 carries a cETLus safety listing, which covers both US and Canadian requirements, and it is RoHS compliant. Combined with the 120V-347V input that makes it usable on Canadian 347V projects as specified.

It weighs 11.91 lbs with a plastic housing, light enough for one person to hold up on a 94.49 inch run but you will still want two mounting points and a helper. The non-metallic body is part of why it holds an IP65 seal in damp and corrosive areas.

The 65-822R1 delivers 80 CRI, which is the normal spec for utility, garage, warehouse, and back-of-house lighting and meets most commercial specs. For color critical work like paint matching or retail display you would want a 90+ CRI fixture instead.

Gray is the finish offered on the 8 foot vapor proof linear, a utility style housing meant for garages, service areas, and covered exterior runs rather than architectural spaces.