You may also like
ABB ELL Series PVC-Coated Rigid Steel 90° Elbow, Gray
The ABB ELL Series is a standard radius, PVC-coated rigid steel conduit elbow built to change direction on threaded rigid conduit runs or at box and fitting terminations. Featuring a 40 Mil PVC exterior coating over hot-dip galvanized rigid steel in a Gray finish, this 90 Degree elbow is factory bent to reduce field labor and wasted material, and it carries cULus and CSA recognition for code-compliant installations.
Key Features
- Pipe Size: 1 Inch/27 Metric for standard rigid conduit runs.
- Durable Construction: Hot-Dip Galvanized Rigid Steel base with a minimum .040 inch (40 Mil) PVC exterior coating for corrosion resistance.
- Interior Protection: Nominal .002 inch (2 Mil) blue urethane interior coating to guard conductors during pulls.
- Type/Configuration: Standard Radius 90 Degree elbow, factory bent to change direction for threaded rigid conduit or when terminating at a box or fitting.
- Color-Coded Thread Protectors: Fitted on each end for easy identification of conduit size.
- Finish: Gray PVC coating for consistent appearance and corrosion protection in the field.
Certifications & Compliance
- cULus E46453
- CSA
Technical Specifications
- Type: Conduit Elbow - Standard Radius
- Color: Gray
- Angle: 90 Degrees
- Pipe Size: 1 Inch/27 Metric
- Radius: 5-3/4 Inch/146.05 Millimeters
- Offset: 8 Inch/203.20 Millimeters
- Straight End: 2-1/4 Inch/57.15 Millimeters
- Unbent Length: 13.53 Inch/343.71 Millimeters
Typical Applications
- Threaded Rigid Conduit Routing and Direction Changes
- Terminations at Boxes and Fittings
- Corrosive or Wet-Location Conduit Runs Requiring PVC Coating
- Commercial and Industrial Electrical Installations
- New Construction and Conduit System Retrofits
Why ABB?
ABB's Ocal-Blue standard radius elbows are factory bent to cut installation time and reduce wasted material compared with field bending. With a hot-dip galvanized rigid steel base, dual-layer PVC and urethane coatings, and cULus/CSA recognition, the ELL Series delivers reliable, code-compliant corrosion protection for demanding electrical installations.
Manufacturer Resources
Product Specs
- Product Type:
- Conduit Elbow
- Angle:
- 90°
- Product Finish:
- Hot-Dip Galvanized
- Listing:
- cULus
- Standards:
- CSA
- Product Material:
- PVC-Coated Steel
- Product Color:
- Gray
- Product Size:
- 1 Inch
- Department:
- Electrical
- Product Group:
- Conduit & Raceway
- Product Subgroup:
- PVC Conduit & Fittings
Ocal ELL1-G – Frequently Asked Questions
1) What trade sizes does the ABB ELL Series PVC-coated elbow come in?
The ELL Series 90 degree elbow is offered in 1 inch (27 metric), part number ELL1-G, and 4 inch (103 metric), part number ELL4-G. Both are gray PVC-coated rigid steel. The published radius, offset and straight-end figures (5-3/4 inch radius, 8 inch offset, 2-1/4 inch straight end, 13.53 inch unbent length) are the 1 inch numbers, so lay out a 4 inch run from the larger fitting's own dimensions.
2) Will a PVC-coated rigid steel elbow thread onto my existing rigid conduit?
Yes. The ELL Series is built for threaded rigid conduit runs and for terminating into boxes and fittings, so it threads to standard rigid conduit of the matching trade size, 1 inch or 4 inch. Each end ships with a color-coded thread protector so you can identify the size on the shelf before you pull it out of the box.
3) How thick is the PVC coating on the ABB ELL elbow, and is the inside protected too?
Coating is a minimum .040 inch (40 mil) gray PVC over a hot-dip galvanized rigid steel body. Inside, there is a nominal .002 inch (2 mil) blue urethane coating so conductors are not chewed up during long pulls. That two-layer setup is what makes it suitable for corrosive and wet-location runs rather than plain galvanized fittings.
4) Is the ABB ELL elbow UL and CSA listed for code inspections?
It carries cULus recognition under file E46453 and CSA. That covers both US and Canadian installations, which matters on cross-border industrial specs where the inspector wants a listed fitting on a corrosion-protected run.
5) Should I use a factory PVC-coated elbow or just field bend the conduit?
Field bending rigid conduit cracks or thins a PVC coating at the bend, which is where corrosion starts. The ELL Series is factory bent at a standard radius, so the 40 mil coating stays intact through the sweep, and it cuts the labor and scrap that come with bending on site. If your run is plain galvanized in a dry interior, a standard elbow is fine; the PVC-coated version earns its place in corrosive or wet locations.
6) Is this a standard radius or a long radius elbow?
Standard radius. The 1 inch ELL1-G sweeps at a 5-3/4 inch (146.05 mm) radius with an 8 inch (203.20 mm) offset and 2-1/4 inch (57.15 mm) straight ends. If your pull calls for a long sweep because of cable bend-radius limits, this is not the fitting for it.
7) Will the gray PVC elbow match the rest of my coated conduit system?
The finish is gray PVC over hot-dip galvanized steel, which is the standard color for ABB's Ocal-Blue coated system, so it lines up visually with gray-coated conduit and fittings already on the run. For facility standardization, both trade sizes, ELL1-G and ELL4-G, carry the same gray coating.
How fast can I get the Ocal ELL1-G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ocal ELL1-G come with a warranty?
Absolutely. The Ocal ELL1-G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ocal ELL1-G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ocal ELL1-G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.