ABUS 54TI/35 Titalium Aluminum...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.23
$7.83

ABUS 54TI/35 Titalium Aluminum Alloy Padlock Keyed Different, 13/64" Shackle diameter

(No reviews yet) Write a Review

Model: 54TI/35 C

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.23
$7.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Padlock 54 TITALIUM™

Secure items at low risk of theft with our 54 TITALIUM™ padlock.

ROBUST, SOLID, LIGHTWEIGHT

Secure items at low risk of theft with our 54 TITALIUM™ padlock.

Bags, caskets, valuable boxes, lockers, or tool boxes can be secured very well against theft with our padlock 54 Titalium. The lock body is made of solid TITALIUM™ special aluminum, which makes it particularly lightweight yet still robust. The hardened steel shackle provides good basic security because it makes the lock more difficult to attack - for example, with a bolt cutter or crowbar.

Technology:

  • Solid lock body made from TITALIUM™ aluminium alloy - higher security, less weight
  • Hardened steel shackle
  • Double bolted

Operation and use:

  • To secure valuables/goods of lesser value or at a low risk of theft
  • To secure bags, suitcases, jewel cases, cash boxes, lockers, tool boxes, etc.

Manufacturer Resources

Product Specs

Product Group:
Other / Miscellaneous Hardware
Horizontal Shackle Clearance:
45/64"
Shackle Diameter:
13/64"
Vertical Shackle Clearance:
5/8"
Product Subgroup:
Padlocks
Product Type:
Padlocks
Subcategory:
Padlocks
Commercial/Residential:
Commercial
Product Model:
54TI/35
Product Category:
Other / Miscellaneous Hardware
Product Width:
1-19/64"
Department:
Door Hardware

ABUS 54TI/35 C – Frequently Asked Questions

1) Will the ABUS 54TI/35 padlock fit through my locker hasp or a standard chain link?
The shackle on the 54TI/35 is 13/64 inch in diameter, with 45/64 inch of horizontal clearance and 5/8 inch of vertical clearance inside the shackle. That is a slim shackle, so it passes through small hasp eyes, zipper pulls, and light staples easily, but the 5/8 inch vertical opening limits how thick a hasp or chain link it will close over. Measure the thickest point your shackle has to wrap and keep it under 5/8 inch.
2) Is the ABUS 54TI/35 strong enough to secure an exterior gate or storage unit?
No, and ABUS is explicit about it. The 54 TITALIUM is intended for items at low risk of theft, such as bags, suitcases, jewel cases, cash boxes, lockers, and tool boxes. With a 13/64 inch shackle it is a light-duty lock. For a gate, yard, or storage unit you want a heavy-shackle padlock instead, for example the Sargent 60-858-2 with its 2 inch stainless steel shackle or the Medeco 521 G8R with a solid stainless steel body.
3) Can I get the ABUS 54TI/35 keyed alike so one key opens all of them?
As supplied, the 54TI/35 C is keyed different, meaning every lock comes with its own unique key and no two open alike. If you are issuing locks to staff individually that is what you want. If you need one key to open a whole bank of locks, this is not the configuration to order.
4) Can I rekey the ABUS 54TI/35 into my building's existing key system?
No. The 54TI/35 ships keyed different on its own key and is not built around an interchangeable core. If you need padlocks that run on your facility's master key system, look at a removable or interchangeable core padlock instead, such as the Sargent 60-858-2 removable core padlock or the Schlage KS23D/KS23F brass padlock in the 20 Series.
5) I need a padlock with a thicker shackle than the ABUS 54TI/35 for an exterior gate - what should I look at instead?
The ABUS 54TI/35 uses a 13/64 inch shackle diameter, which suits bags, lockers, cash boxes and tool boxes at low risk of theft. For a heavier shackle, the Schlage KS23D/KS23F brass padlock uses a 5/16 inch shackle, and the Medeco 5260 brass body padlock in the 52 Series uses a 7/16 inch shackle. Both are brass-body locks rather than the aluminum alloy body of the 54TI/35.
6) Does the key stay in the ABUS 54TI/35 when it is unlocked, and what if I need it to?
The ABUS 54TI/35 is a keyed different Titalium aluminum alloy padlock with a hardened steel double bolted shackle. If your application requires the key to be captive so it cannot be removed while the lock is open, the Sargent 758 is a key retaining padlock in a US4 satin brass finish. The Sargent 858 and the Sargent 82-856 are non-key retaining, so the key comes free when the lock is open.
7) What is TITALIUM on the ABUS 54 padlock, and is an aluminum body a downgrade from brass?
TITALIUM is ABUS's special aluminum alloy. The 54's body is solid TITALIUM rather than brass or steel, which cuts the weight substantially while keeping the body rigid, and the shackle itself is hardened steel so the part most likely to be attacked with a bolt cutter or pry bar is not aluminum. It is a different trade-off, not simply weaker: if you want a metal body with more mass, the Medeco 5260 uses a brass body and the Sargent 82-856 a 2 by 2 inch brass case.
8) Does the ABUS 54TI/35 stay locked if someone pries on one side of the shackle?
The 54 TITALIUM is double bolted, so the shackle is locked on both the heel and the toe rather than only on one leg. Cutting or forcing a single side does not release it, which is the main reason this body holds up better than a single-bolted lock of the same size.
9) I need a padlock that holds up outdoors in rain and salt air. Is the ABUS 54TI/35 the right pick?
Use a lock built for weather instead. The 54 TITALIUM is an indoor-duty lock for lockers, tool boxes, cases, and cash boxes. For wet or exposed openings ZenSupply carries the Medeco 521 G8R weather-tight padlock with a solid stainless steel body, and the Medeco 54515G electronic indoor/outdoor padlock.
10) We want audit trail and access control on padlocked assets - is the ABUS 54TI/35 the wrong direction?
Yes. The 54TI/35 is a mechanical keyed different padlock with no electronics. For electronically credentialed padlocking, the Medeco 54515G XT is an electronic indoor/outdoor padlock, non-key retaining, with a 5/16 inch shackle diameter and cylinder included.
11) How much room does the ABUS 54TI/35 shackle give me compared to a larger brass padlock?
The ABUS 54TI/35 offers 45/64 inch horizontal shackle clearance and 5/8 inch vertical clearance on a body 1-19/64 inch wide, so it is sized for hasps and locker latches rather than heavy gate hardware. If the hasp is larger, the Sargent 60-858-2 carries a 2 inch stainless steel shackle and the Sargent 82-856 uses a 2 inch by 2 inch brass case.
12) I need a high security key system on my padlocks - is the ABUS 54TI/35 keyway going to do that?
The 54TI/35 ships keyed different for securing lockers, tool boxes and cases where each lock stands alone. For a patented high security key platform, the Medeco 5260 in the 52 Series uses M3 key technology in a brass body with satin chrome finish, and the Sargent 82-856 is built on the KESO series.
13) Does the key come out of the ABUS 54 padlock while it is unlocked?
Key retention is the deciding detail for some jobs and it differs by product. If you specifically need the key to stay captive until the lock is closed again, so employees cannot walk off with an open lock and the key, order a key retaining model such as the Sargent 758. If you want the key free while the lock is open, the Sargent 858 and Medeco 54515G are non-key retaining.
14) Is the ABUS 54TI/35 a consumer lock or is it meant for commercial use?
It is classed as commercial door hardware, but commercial here means facility use such as employee lockers, tool cribs, and cash boxes rather than perimeter security. Buyers standardizing a locker room or a stockroom on one lock model order this size; buyers securing an entrance or an exterior gate should be looking at a heavier padlock.
15) Why choose the ABUS 54TI/35 over the brass body padlocks?
The 54TI/35 body is solid TITALIUM special aluminum alloy, which keeps the lock lightweight while staying robust, paired with a hardened steel double bolted shackle. The comparable Schlage KS23D/KS23F, Medeco 5260 and Sargent 82-856 all use brass bodies, which carry more mass. If weight on the hasp or on a rolling tool cart matters, the aluminum alloy body is the differentiator.
How fast can I get the ABUS 54TI/35 C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ABUS 54TI/35 C come with a warranty?
Absolutely. The ABUS 54TI/35 C is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ABUS 54TI/35 C?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ABUS 54TI/35 C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.