Adams Rite 31-0265-IP Dogging ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.00
$17.31
Adams Rite 31-0265-IP Dogging Assembly for 8000 Series Exit Devices, aluminum construction, polished chrome finish, front view showing key cylinder and indicator dot

Adams Rite 31-0265-IP Dogging Assembly for 8000 Series Exit Devices - Aluminum Construction

(No reviews yet) Write a Review

Model: 31-0265-01

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.00
$17.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Adams Rite 31-0265 Dogging Assembly for 8000 Series Exit Devices

The Adams Rite 31-0265 dogging assembly is a direct-replacement component for 8000 Series exit devices. Dogging holds the exit device latchbolt in the retracted position, allowing free passage without actuating the touchbar - a common requirement in high-traffic commercial corridors, lobbies, and propped-open service doors during business hours.

Two variants are available to match your installation type:

  • 31-0265-01 - Standard dogging assembly for non-electrified, non-alarmed exit device installations.
  • 31-0265-IP - Isolation-plate dogging assembly required when the exit device is connected to an electric latch retraction, alarm, or access control system. The IP variant electrically isolates the dogging mechanism to prevent interference with the electrified circuit.

Compatibility

  • Adams Rite 8000 Series exit devices (8300, 8400, 8700, 8800, EX88)
  • Narrow stile aluminum door applications
  • Rim and top-of-door mounted configurations

Construction

  • Aluminum construction
  • Series-specific design for direct drop-in replacement

Installation

Install per the Adams Rite 8000 Series exit device installation instructions. Confirm whether your device is connected to an electrified or alarmed system before ordering - electrified and alarmed installations require the 31-0265-IP variant. Refer to the Adams Rite Product Catalog (linked below) for torque specs and assembly diagrams.

Manufacturer Resources

Adams Rite Product Catalog

Product Specs

Product Group:
Parts and Accessories
Product Subgroup:
Parts and Accessories
Commercial/Residential:
Commercial
Subcategory:
Parts and Accessories
Product Category:
Parts and Accessories
Department:
Door Hardware
Product Type:
Dogging Assembly

Adams Rite 31-0265-01 – Frequently Asked Questions

1) Do I need the 31-0265-01 or the 31-0265-IP dogging assembly for my Adams Rite exit device?
It comes down to whether the exit device is wired. The 31-0265-01 is the standard dogging assembly for exit devices with no electrification and no alarm. The 31-0265-IP is the isolation-plate version, and it's the one you need any time the device is tied into electric latch retraction, an alarm, or access control - the isolation plate keeps the dogging mechanism from interfering with that circuit. Pull the device off the door and check for wiring before you order; the two are not interchangeable in an electrified opening.
2) What does dogging actually do on an exit device, and why would I replace the assembly?
Dogging holds the exit device latchbolt retracted so the door pushes open freely without anyone hitting the touchbar. That's how a lobby or corridor door stays in free-passage mode during business hours and gets secured again after. When the dogging stops holding, or the mechanism is seized or missing after a device rebuild, the 31-0265 assembly is the replacement component for 8000 Series devices.
3) Will an Adams Rite 31-0265 dogging assembly work on a narrow stile aluminum storefront door?
Yes - narrow stile aluminum doors are exactly the application. The 8000 Series exit devices it serves are used on narrow stile aluminum openings, in rim and top-of-door mounted configurations. Glass front installers replacing dogging on storefront entrances are the typical buyer for this part.
4) Can I standardize one dogging assembly across all the Adams Rite exit devices in my building?
Across 8000 Series devices, yes - one part covers the 8300, 8400, 8700, 8800 and EX88. What splits your order is electrification: openings on access control or alarm take the 31-0265-IP, plain mechanical openings take the 31-0265-01. For a facility with mixed openings, count the wired doors separately and stock both.
5) Where do I find torque specs and the assembly diagram for the Adams Rite 31-0265 dogging assembly?
Install it per the Adams Rite 8000 Series exit device installation instructions; the torque specs and assembly diagrams are in the Adams Rite Product Directory, which ZenSupply hosts alongside the part. There is no separate procedure for the dogging assembly on its own - it's serviced as part of the device.
How fast can I get the Adams Rite 31-0265-01 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Adams Rite 31-0265-01 come with a warranty?
Absolutely. The Adams Rite 31-0265-01 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Adams Rite 31-0265-01?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Adams Rite 31-0265-01 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!