Adams Rite 7111 Electric Strik...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$271.00
$190.06
Adams Rite 7111 Electric Strike with Long Face Plate 1-7/16" x 10-1/4" Satin Chrome

Adams Rite 7111 Electric Strike with Long Face Plate 1-7/16" x 10-1/4" Satin Chrome

(No reviews yet) Write a Review

Model: 7111-510-652-00
$271.00
$190.06

In Stock (leaves warehouse same day if ordered before 3pm ET)

$271.00
$190.06
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Adams Rite 7111 Electric Strike with Long Face Plate 1-7/16" x 10-1/4" Satin Chrome

Professional Electric Strike for Deadlatches and Cylindrical Locks

The Adams Rite 7111 Electric Strike provides remote electrical control for doors equipped with Adams Rite 4500, 4700, or 4900 Deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection. This Grade 1 electric strike features a 1-7/16" x 10-1/4" flat faceplate with radius corners and accommodates aluminum, hollow metal, or wood applications. UL 1034 burglary-resistant listed and UL 294 (6th Edition) listed for professional security installations.

Professional Features & Benefits

  • Specifically engineered for narrow stile aluminum doors
  • Hollow metal and wood door options available
  • Accepts standard Adams Rite MS® cam mortise cylinders
  • Multiple finish options: US3, US4, US10B, US32, US32D
  • UL Listed models available
  • Compatible with Adams Rite electric strikes for access control
  • An ASSA ABLOY Group brand

Technical Specifications

  • For complete technical specifications, contact Adams Rite at 1-800-626-7590 or visit adamsrite.com.

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm voltage (12, 16, or 24 Volt AC/DC) and current capacity before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for wiring access, ventilation, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure operational settings including fail-safe or fail-secure operation per application requirements.
  6. Restore power and test all functions including normal operation, latchbolt engagement, and integration with connected access control systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Security Systems
  • Educational Institution Access Control
  • Healthcare Facility Entry Management
  • Retail Loss Prevention Systems
  • Industrial Facility Access Points
  • Government and Municipal Buildings
  • Multi-Tenant Residential Properties

Why Choose Adams Rite Quality?

Adams Rite 7100 Series Electric Strikes deliver professional-grade reliability with UL 1034 burglary-resistant listing and UL 294 (6th Edition) certification for demanding commercial applications. The stainless steel bolt retaining keeper and Grade 1 construction ensure dependable performance in high-traffic environments. Backed by a comprehensive 5-year manufacturer warranty for added confidence and protection.

Product Specs

Series:
7100 Series
Grade:
Grade 1
Warranty:
5 Year
Subcategory:
Electric Strikes
Latch Throw:
1/2"
Product Group:
Electronic Access Controls
Product Subgroup:
Electric Strikes
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Type:
Cylindrical
Product Model:
711
Face Plate:
1-7/16"
Fire Rating:
No
Door Strike:
1-3/4"
Product Category:
Electronic Access Controls
Department:
Door Hardware
Product Type:
Electric Strikes

Adams Rite 7111-510-652-00 – Frequently Asked Questions

1) Will the Adams Rite 7111 electric strike work with my Adams Rite 4500 deadlatch?
Yes. The 7111 is built to release Adams Rite 4500, 4700, and 4900 deadlatches, and it also works with cylindrical locksets whose latchbolt projects 1/2 inch to 5/8 inch. That deadlatch pairing is the reason this strike exists, and it is why it shows up on narrow stile aluminum entrances more than anywhere else. If your lock throws more than 5/8 inch, this is the wrong keeper.
2) What size cutout does the Adams Rite 7111 long faceplate need in the jamb?
The faceplate measures 1-7/16 x 10-1/4 inches with radius corners, so the jamb has to accept that footprint. On a narrow stile aluminum jamb the 1-7/16 inch width is the number that decides it, and the 10-1/4 inch length is what lets the strike cover an existing longer cutout rather than requiring a filler plate. Flat plate, not a bent lip design.
3) Which lip extension do I order for the Adams Rite 7111 strike?
The lip length has to reach past the face of the door so the latch rides onto it instead of catching the edge. Measure from the strike face on the jamb out to the door stop face. The 7111 is offered in 1-1/16 inch or less, 1-1/2, 1-5/8, 1-3/4, 2, 2-1/4, 2-1/2, and 2-7/8 inch lips. On a typical aluminum entrance with a shallow jamb you are usually in the short end of that range; deep hollow metal frames drive you long.
4) Should I order the Adams Rite 7111 fail-safe or fail-secure?
Fail-secure keeps the door locked when power drops, so the keeper stays rigid and the opening stays secured; that is the normal choice for an exterior entrance or a tenant suite door. Fail-safe releases on power loss, which is what you specify when the opening has to free up in an alarm or power failure, typically on an egress path under the authority having jurisdiction. The 7111 is ordered as one or the other, and each is also available monitored, which adds the switch output so your access control panel can report door and latch status back to the head end.
5) I need an electric strike for a mortise lock, not a deadlatch. Is the 7111 right?
No, that is the wrong keeper. The 7111 is a cylindrical and deadlatch strike. For a mortise lock, the Securitron MUNL Mortise UnLatch is a Grade 1 fire rated option, the Von Duprin 6210 is a fire rated Grade 1 mortise strike, and the Von Duprin 6400 is a modular Grade 1 strike that covers mortise or cylindrical locks.
6) What is the minimum latchbolt throw the Adams Rite 7111 will hold?
The keeper is set up for a 1/2 inch latch throw at minimum and works up to 5/8 inch projection. A shallower bolt than 1/2 inch will not seat reliably in the keeper. If your existing lock throws 3/4 inch, look at the HES Folger Adam 310-1(X) strike body, which covers 1/2, 5/8, and 3/4 inch throw latchbolts.
7) The opening needs a fire rated electric strike - what do I use instead of the Adams Rite 7111?
The Adams Rite 7111 carries a Fire Rating of No, so a labeled opening needs a different strike. Fire rated Grade 1 options for cylindrical locks include the Von Duprin 4211 32D and the Hager 2930, which is a fire rated Grade 1 electric strike for cylindrical and mortise locks with 12/24 VDC dual voltage. For a mortise lock on a labeled opening, the Von Duprin 6400 32D is Grade 1 with a 3-hour UL 10C fire rating in fail-secure, and the Von Duprin 6210 is Grade 1 fire rated for mortise locks at 24 VDC fail-secure.
8) My door has a rim exit device, not a cylindrical lock - is the Adams Rite 7111 the right strike?
The Adams Rite 7111 is built for cylindrical lock type openings with a 1/2 inch latch throw. For an exit device, the strike has to match the device. The Hager 2945 is a fire rated rim exit strike with field selectable fail safe/fail secure and a latchbolt monitor. The SDC 30-4 is a rim mount electric strike for a 3/4 inch Pullman latchbolt in stainless steel. For surface vertical rod devices, the HES Folger Adam 310-4-2 is a complete Grade 1 electric strike pac.
9) Which strikes besides the Adams Rite 7111 will run on a 12 or 16 volt AC transformer?
The Adams Rite 7111 is ordered in 12 VAC, 16 VAC, or 24 VAC as well as the matching DC voltages, so it drops onto an existing AC transformer without a rectified supply. Among the alternatives, the Trine 004 runs 8-16VAC fail secure with a 6-1/4 inch by 1-3/8 inch faceplate and up to 5/8 inch throw, and the Trine 2001 runs 16-24VAC/DC fail secure with a 5-7/8 inch by 1-1/4 inch faceplate and up to 5/8 inch. Several of the alternatives are DC only: the Von Duprin 4211 32D is 12/24 VDC, the SDC 15 Series is 12/24 VDC, and the Dortronics 3300 is 12/24VDC.
10) I need latchbolt monitoring - which strikes offer it besides the Adams Rite 7111?
The Adams Rite 7111 is ordered in Fail-Safe/Monitored and Fail-Secure/Monitored configurations, so monitoring is selected with the function. Among the alternatives, the Dortronics 3300 Series includes a latch bolt sensing switch, the Hager 2945 is a rim exit strike with a latchbolt monitor, and the Camden CX-ED1799L-8 is a fire rated dual monitor Grade 1 strike.
11) Is the Adams Rite 7111 strong enough for a high traffic commercial entrance?
It is a Grade 1 commercial strike, UL 1034 burglary resistant listed and UL 294 (6th Edition) listed for access control use, with a stainless steel bolt retaining keeper. That combination is what you want on a storefront or a main building entry rather than a light duty strike. It is a commercial product, not a residential one.
12) Will the Adams Rite 7111 strike fit a hollow metal or wood frame, or is it aluminum only?
It handles all three. The 7111 was engineered around narrow stile aluminum doors, and it also has hollow metal and wood applications. Practically, the flat 1-7/16 inch wide plate is what makes the aluminum jamb work, and the same plate drops into a metal or wood jamb prepped to that footprint.
13) What is the difference between the Adams Rite 7111 and a universal electric strike with multiple faceplates?
The 7111 is a single long flat plate strike sized for narrow stile aluminum work with an Adams Rite deadlatch or a cylindrical lock. A universal kit ships several plates so one body covers several jamb preps: the Camden CX-ED1689L-4 comes with four faceplates and the CX-ED1799L-8 with eight, both fire rated Grade 1. If you are stocking one strike to cover mixed openings across a portfolio, a universal kit does that; if the opening is a known Adams Rite aluminum entrance, the 7111 is the direct fit.
14) Do I have to cut the frame to install the Adams Rite 7111?
Yes, the 7111 needs a jamb prep sized to its 1-7/16 x 10-1/4 inch plate and body cavity. If cutting the frame is off the table, the Locknetics NC450 is a no cut electric strike. On a jamb already prepped to standard ANSI, the Dortronics 3300 Series uses a 4-7/8 x 1-1/4 inch ANSI prep strike plate.
15) How do I get door position or latch status back to my access control panel with the Adams Rite 7111?
Order one of the monitored versions. Both fail-safe and fail-secure are offered monitored, which gives you the contact output to wire back to the panel so the system knows the condition of the opening instead of assuming it. If you are integrating with a card reader head end and want alarm reporting, specify monitored at order time, since it is a build option and not a field add.
16) What is a simpler electric strike than the Adams Rite 7111 for a light duty interior door?
The Adams Rite 7111 is a Grade 1 commercial strike offered in 12, 16, and 24 volt AC and DC with four function configurations and eight lip extension lengths, which is more strike than a low traffic interior office door usually needs. For a lighter application, the Trine 001 Series is a fail-secure light commercial electric strike with a 5-7/8 inch by 1-1/4 inch faceplate, and the RCI 15BS is an economy fail-secure strike for a special offset latch entry. The SDC 25 Series is a value strike with 1/2 inch latchbolt compatibility, which is the same latch throw the 7111 is specified for.
17) What looks like a substitute for the Adams Rite 7111 but is not a complete strike?
Two entries in the same category are accessory and component items rather than a working strike. The HES 1500 and HES 1600 listings are electric strike accessories for those Grade 1 series, and the HES Folger Adam 310-1(X) is a strike body, sold as the body for 1/2 inch, 5/8 inch, or 3/4 inch throw latchbolts. The Adams Rite 7111 is a complete strike ordered by voltage, function, and lip extension. If you want a packaged assembly instead of a body, the HES Folger Adam 310-4-2 is a complete Grade 1 strike pac for surface vertical rods.
18) For a high traffic entrance, what heavy duty strikes compare to the Adams Rite 7111?
The Adams Rite 7111 is Grade 1 with a stainless steel bolt retaining keeper for high traffic commercial openings. Peers carrying a heavy duty rating include the Alarm Controls AES-100, which is Grade 1 heavy duty, the Locknetics MDS100 and Locknetics MS100 in satin stainless, and the Von Duprin 4211 32D, 6210, and 6400 32D, all Grade 1 heavy duty. The Locknetics CS450 is another option in the same class of commercial strike.
19) Is the SDC 45F a direct swap for the Adams Rite 7111?
Not on a narrow stile aluminum door. The SDC 45F is a fire-rated electric strike with 5/8 inch latchbolt compatibility and a radius corner faceplate, and the Adams Rite 7111 also uses a flat faceplate with radius corners, so the corner profile matches. The difference that decides it is the plate itself: the 7111 plate is 1-7/16 inches wide by 10-1/4 inches long for narrow stile aluminum, and the 7111 is specified at a 1/2 inch latch throw against the 45F at 5/8 inch. Confirm the frame opening and the bolt on the lock before treating one as the other.
20) Can I match the Adams Rite 7111 finish to the rest of my door hardware?
The 7100 Series comes in US3 bright brass, US4 satin brass, US10B oil rubbed bronze, US32 bright stainless, and US32D satin stainless. Satin chrome US26D style openings generally get matched with US32D, which is the common commercial choice and what most aluminum storefront hardware is finished in.
21) Does the Adams Rite 7111 need a special cylinder?
Where an Adams Rite mortise cylinder is used with this hardware, it takes the standard Adams Rite MS cam mortise cylinder, so you can key it into the same system as the rest of the Adams Rite hardware on the entrance rather than sourcing an odd cam.
How fast can I get the Adams Rite 7111-510-652-00 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Adams Rite 7111-510-652-00 come with a warranty?
Absolutely. The Adams Rite 7111-510-652-00 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Adams Rite 7111-510-652-00?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Adams Rite 7111-510-652-00 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!