Adams Rite EX80 Dummy Push Bar...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$568.00
$328.84
Adams Rite EX80 Dummy Push Bar Exit Device with Monitoring Switches - Regular 36" Dark Bronze

Adams Rite EX80 Dummy Push Bar Exit Device with Monitoring Switches - Regular 36" Dark Bronze

(No reviews yet) Write a Review

Model: EX80-R313
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$568.00
$328.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Adams Rite EX80 Dummy Push Bar Exit Device with Monitoring Switches - Regular 36" Dark Bronze

Professional Non-Latching Exit Device Solution

The Adams Rite EX80 Dummy Push Bar Exit Device provides reliable egress control for applications requiring non-latching operation with magnetic locks or other locking systems. This Grade 1 device features dual monitoring switches for redundancy, field-selectable active or inactive configuration, and accommodates 30" to 36" door openings with minimum 2" stile width. Constructed with extruded aluminum pushbar and back bar with matching dark bronze anodized finish for commercial durability.

Professional Features & Benefits

  • ANSI/BHMA Grade 1 certified
  • Narrow stile aluminum door construction
  • Rim (8300/8400) and top-of-door mounted (8800/8700/EX88) configurations
  • Stainless steel touchbar / crossbar
  • UL 10C fire door listed
  • Panic-proof single-motion egress
  • Available with electric latch retraction
  • Compatible with 7800 electric strike
  • Multiple trim options and levers
  • Field-reversible handing

Technical Specifications

  • Door Application: Narrow stile aluminum doors
  • Configuration: Rim, mortise, top-of-door mounted
  • Egress: Single-motion panic proof
  • Compatible Strike: 7800 Series electric strike
  • Fire Rating: UL 10C listed
  • ANSI/BHMA: Grade 1
  • Handing: Field reversible

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
  6. Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Adams Rite Quality?

Adams Rite EX80 Series exit devices deliver professional-grade reliability with extruded aluminum construction and Grade 1 certification for demanding commercial applications. UL 294 Access Control System Units certification and NFPA 101 Life Safety Code compliance ensure code-compliant performance. 5 Year warranty coverage provides added confidence for installations where dependable egress control is essential.

Product Specs

Product Group:
Exit Devices and Trim
Series:
EX80 Series
Grade:
Grade 1
Stile Width:
2-1/2"
Warranty:
5 Year
Product Subgroup:
Exit Devices - Rim
Subcategory:
Rim Exit Devices
Fasteners:
Machine Screws
Commercial/Residential:
Commercial
Keyed Function:
Non-Keyed
Keyed:
No
Stile Type:
Narrow Stile
Lock Function:
Dummy
Segment:
Door Hardware
Product Model:
EX80
Product Function:
Dummy
Fire Rating:
No
Product Style:
Push Bars
Product Category:
Exit Devices and Trim
Product Substrate:
Aluminum
Department:
Door Hardware
Product Type:
Exit Devices - Dummy

Adams Rite EX80-R313 – Frequently Asked Questions

1) What is the Adams Rite EX80 dummy push bar actually for if it doesn't latch?
The EX80 is a dummy device: it has no latch and locks nothing on its own. It gives you a code-compliant single-motion push bar on the egress side of an opening that is held by something else, typically a maglock or another electric locking system. The two monitoring switches report the push, so your access control panel can drop power to the lock and release the door. If you need the device itself to secure the opening, this is the wrong function and you want a latching rim exit device instead.
2) Will an Adams Rite EX80 push bar fit a narrow stile aluminum storefront door?
That is the door it is built for. The EX80 mounts on narrow stile aluminum doors with a 2-1/2 inch stile width, so a typical storefront or entrance stile takes it. Measure the vertical stile face at the lock edge before ordering; anything narrower than 2-1/2 inches is not a fit for this device.
3) Is the EX80 handed, or can I use one part for left and right hand doors?
Handing is field reversible on the EX80, so one device serves both hands and you do not specify a hand when ordering. That matters if you are stocking spares for a building with doors swinging both ways: one part number covers the openings.
4) Can the Adams Rite EX80 dummy push bar be used on a fire rated door?
No. The EX80 dummy carries no fire rating, and a dummy device provides no latching, which a fire door assembly requires to stay positively latched in a fire. For a rated opening you need a fire labeled latching exit device, not this one.
5) Why does the EX80 have two monitoring switches instead of one?
The pair of switches is there for redundancy, and each is field selectable as active or inactive. That gives you two independent signals off one push: one can release the maglock while the other reports the egress event to the access control panel or an alarm shunt, or you can leave a switch inactive as a spare for a later system change without pulling the bar off the door.
6) Is the EX80 push bar rated for high traffic commercial use?
It is an ANSI/BHMA Grade 1 device, the heaviest commercial duty grade, and it is built for commercial rather than residential openings. The pushbar and back bar are extruded aluminum with a stainless steel touchbar. For a school entrance, a retail vestibule, or a multi-tenant lobby that sees constant traffic, Grade 1 is the level you want to be specifying.
7) Does the EX80 dummy push bar take a cylinder or key?
No cylinder, no keyway, no keying. The EX80 dummy is a non-keyed device, so there is nothing to key into a master system and no outside key retraction. Access from the outside is handled entirely by whatever locks the door, usually the maglock and its reader or keypad, not by the push bar.
8) Should I use a dummy push bar with a maglock, or a latching rim exit device?
It comes down to what holds the door. Where an electromagnetic lock or another electrified lock already secures the opening and the fire marshal wants a single-motion push to release it, the EX80 dummy is the right piece: it adds the panic bar and the switches without adding a second latch to fight the maglock. Where nothing else secures the door, a dummy leaves the opening unlocked, and you want a latching rim device with a strike instead. The EX80 family also builds as a latching device with electric latch retraction and works with the Adams Rite 7800 electric strike, so the same bar profile can carry across a set of doors that mix the two approaches.
9) What finish does the 36 inch EX80 push bar come in?
Dark bronze anodized, finish code 313, on both the pushbar and the back bar so the two match on the door. Anodized bronze is the common storefront finish, so on a building where the existing aluminum entrances are dark bronze this bar will read as part of the same set rather than a replacement piece.
10) What fasteners come with the EX80, and do I need to tap the door?
The EX80 mounts with machine screws, which means threaded holes rather than sheet metal fasteners biting into the skin. On an aluminum stile that means drilling and tapping to the manufacturer template. Adams Rite publishes the template and hole pattern in the installation instructions, and working to it is what keeps the bar square on a narrow stile.
How fast can I get the Adams Rite EX80-R313 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Adams Rite EX80-R313 come with a warranty?
Absolutely. The Adams Rite EX80-R313 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Adams Rite EX80-R313?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Adams Rite EX80-R313 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!