Aiphone MB-RF1 - Retrofit Mounting Box

No. The MB-RF1 is an adapter bracket that goes inside an existing tower or emergency wall box, not a standalone enclosure. If you need an actual surface-mount enclosure, the SDC 480-SSB is a weatherized surface mount box at 5-1/2 x 5-1/2 x 2-1/8 inches with a battery clip, which is a different job entirely.

Only the emergency call stations. The bracket is cut for Aiphone IX and IS series Rescue Assistance stations. A standard IX video door station or an IS master is a different form factor and is not what this bracket is built around.

It is the mounting bracket only. You order the Aiphone IX or IS Rescue Assistance station separately, and any wiring, conduit fittings, or power supply the station itself calls for are separate as well.

Different products for different devices. The MB-RF1 adapts Aiphone emergency call stations into existing third-party towers. The MS Sedco boxes are two-piece mounting boxes for activation switches, the 1010 for the 59J and 614-SSN series and the 1015 for the 59, 59V, 1078, 216, 830 and 614 series. If you are mounting a push plate or activation switch rather than a call station, those are the ones to look at.

The MB-RF1 is a retrofit mounting bracket that adapts Aiphone IX and IS Rescue Assistance stations to existing Code Blue and Talk-A-Phone towers and wall boxes, so the weather protection comes from the host tower rather than the bracket. If the drawing calls for the enclosure itself to be weatherized and to carry a battery clip, the SDC 480-SSB surface mount box is specified that way at 5-1/2 by 5-1/2 by 2-1/8 inches.

Yes, Aiphone catalogs the MB-RF1 as a commercial product, which is consistent with where these go: campus, parking structure, and transit emergency call stations rather than residential entries.