You may also like
AL IR SERVENTR WDGE CLMP/SLDR 2-6 F
Manufacturer Resources
Product Specs
- Connection Type:
- Tension
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Aluminum Service Wedge Clamp
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Type2:
- Cable gland connector
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 17-1/2 in X Depth Flexible
- Installation Category:
- Yes
- Product Material:
- Iridited Aluminum
Blackburn W62-1BFC – Frequently Asked Questions
1) Is the Blackburn W62-1BFC aluminum clamp OK on copper conductors?
The body is iridited aluminum. Iridite is a chromate conversion coating used on aluminum connectors to slow oxidation, and aluminum-bodied clamps are intended for aluminum conductors unless the connector is specifically marked AL9CU for dual use. For copper service conductors, use a copper or dual-rated connector instead.
2) What is the Blackburn W62-1BFC wedge clamp used for?
It's an aluminum service wedge clamp for service entrance connections, made of iridited aluminum with a bare finish and no insulation. It handles one conductor per clamp and relies on tension to hold the connection rather than a set screw or compression barrel.
3) How long is the W62-1BFC wedge clamp assembly?
The clamp measures 17-1/2 inches in length, with a flexible depth, so plan for that much room in the pedestal, weatherhead, or service box when you lay out the connection.
4) How many wedge clamps do I need for a three-conductor service drop?
Each clamp takes a single conductor and it is sold individually, so a three-conductor service needs three of them. Order per-phase and add one more if you are also terminating a neutral.
5) Does a wedge clamp need a torque wrench like a set-screw lug?
No. This is a tension-type connector: the wedge is driven to develop and hold contact pressure, so there is no screw torque value to hit. That's the practical reason crews pick wedge clamps over set-screw connectors on service entrance work, no re-torque call-back.
6) What part number and brand should I put on the order for this wedge clamp?
Blackburn W62-1BFC. It's a single-model item with no finish or size options to specify, and it's manufactured in Mexico.
How fast can I get the Blackburn W62-1BFC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn W62-1BFC come with a warranty?
Absolutely. The Blackburn W62-1BFC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn W62-1BFC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn W62-1BFC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.