You may also like
AL IR SRVENT WDGE CLMP/SLDR 2-6 F T
Manufacturer Resources
Product Specs
- Connection Type:
- Tension
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Aluminum Service Wedge Clamp
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Type2:
- Cable gland connector
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 17-1/2 in X Depth Flexible
- Installation Category:
- Yes
- Product Material:
- Iridited Aluminum
Blackburn W62-1BFC-T – Frequently Asked Questions
1) What voltage is the Blackburn W62-1BFC-T service wedge clamp rated for?
The W62-1BFC-T wedge clamp carries a 35 kV rating, so it covers secondary service work as well as medium-voltage distribution taps up to that class. It is supplied bare, with no insulation on the connector itself, so the covering over the completed connection is up to your specification.
2) Is the Blackburn W62-1BFC-T made of aluminum, and can it be used on aluminum conductor?
It is an iridited aluminum wedge clamp. The iridite conversion coating on the aluminum body is what lets it be used on aluminum conductor without setting up a galvanic problem at the contact, and aluminum bodies are the standard choice for AL-to-AL and AL-to-CU service taps.
3) Does the Blackburn W62-1BFC-T need a crimp tool or compression die?
No compression tooling. This is a tension-type wedge clamp, so the connection is made mechanically by driving the wedge to load the conductors against the body. That makes it a field-friendly connector for service entrance work where you do not want to haul a hydraulic crimper up a ladder.
4) How many conductors does the Blackburn W62-1BFC-T wedge clamp take?
One conductor per clamp. If you are landing a three-phase service or multiple taps, you will need a separate clamp for each run, and it is sold each rather than in a kit or bag.
5) How long is the Blackburn W62-1BFC-T clamp assembly?
The assembly measures 17-1/2 inches in length, with a flexible depth. That length matters on tight service pedestals and crowded weatherheads, so check your clearance before you order a run of them.
6) What exact part number should I order for the Blackburn aluminum service wedge clamp with solder?
Order Blackburn W62-1BFC-T. That is the manufacturer part number for the iridited aluminum service entrance wedge clamp, and it ships as a single item rather than a multi-pack.
7) Where is the Blackburn W62-1BFC-T manufactured?
Manufactured in Mexico. Utility and municipal buyers working to domestic-preference procurement rules should account for that country of origin before specifying it on a public job.
How fast can I get the Blackburn W62-1BFC-T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn W62-1BFC-T come with a warranty?
Absolutely. The Blackburn W62-1BFC-T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn W62-1BFC-T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn W62-1BFC-T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.