You may also like
AL IR SERVENTR WDGE CLMP/SLDR 2-6 T
Manufacturer Resources
Product Specs
- Connection Type:
- Tension
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Aluminum Service Wedge Clamp
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Type2:
- Cable gland connector
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 12 in X Depth 2-3/8 in
- Installation Category:
- Yes
- Product Material:
- Iridited Aluminum
Blackburn W62-1B-T – Frequently Asked Questions
1) What conductor sizes does the Blackburn W62-1B-T wedge clamp take?
The W62-1B-T is the 2-6 T range tap connector in Blackburn's service entrance wedge clamp line, so it handles one conductor per connector. It's a single-conductor device, not a multi-tap body, so you need one clamp per connection you're making.
2) Can I use this Blackburn service entrance wedge clamp on a 15 kV or 25 kV system?
Yes. The W62-1B-T carries a 35 kV voltage rating, which covers 15 kV and 25 kV distribution work as well as 35 kV.
3) Is the W62-1B-T insulated, or do I need to cover it after installation?
It ships bare. Insulation material is listed as none and the surface finishing is bare, so the connection needs to be covered or taped per your specification if the application calls for it.
4) Will this Blackburn clamp corrode on an outdoor aluminum service drop?
The body is iridited aluminum, a chromate conversion coating on aluminum that resists oxidation and keeps the aluminum-to-aluminum connection stable. Being aluminum, it's intended for aluminum conductor work rather than being a plated copper-rated body.
5) How does a wedge clamp connection differ from a compression or bolted lug?
This one is a tension type connection. A wedge clamp drives a wedge into a C-shaped body so spring tension holds the conductors together, which means no crimp tooling die sets and no torque wrench on a bolt head. Compression lugs need a matched die and a hydraulic tool; bolted connectors need periodic torque checks. The tension wedge stays loaded on its own.
6) How much room do I need in the weatherhead or pedestal for this connector?
Plan for a piece measuring 12 in by 2-3/8 in. That length matters in a tight service entrance head or a crowded pedestal, so check your clearance before you commit to it.
7) Does the W62-1B-T come in a bag or box, or is it sold one at a time?
Sold each, one clamp per unit. Since it takes a single conductor per connector, count one for every tap you're making and order quantity accordingly.
8) What is the exact part number and manufacturer for this aluminum wedge clamp?
Blackburn W62-1B-T, an aluminum service wedge clamp. That's the number to quote for a match, and the part is made in Mexico.
How fast can I get the Blackburn W62-1B-T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn W62-1B-T come with a warranty?
Absolutely. The Blackburn W62-1B-T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn W62-1B-T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn W62-1B-T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.