You may also like
AL MULT BOTHSIDE CONN 5PORT 750-250
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire Connectors & Terminals
- Product Type:
- Multi-Tap Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Wire Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTD7502505 – Frequently Asked Questions
1) What conductor range does the Blackburn AMTD7502505 multi-tap connector accept?
The AMTD7502505 is a 750-250 connector, so each of its five ports takes conductors from 750 kcmil down to 250 kcmil. It is an aluminum body, rated for aluminum or copper work as a mechanical multi-tap, and ports run on both sides of the block. If your taps are smaller than 250 kcmil you need a different multi-tap range, not this one.
2) Is this Blackburn 5-port tap connector rated for 600 volt service?
Yes. The AMTD7502505 carries a 600 V rating, which covers normal commercial and industrial feeder and branch distribution up to 600 volts. It is UL listed under file E9809.
3) Can I use an aluminum multi-tap connector like the AMTD7502505 with copper conductors?
The body is aluminum, which is the standard construction for dual-rated mechanical multi-tap blocks used on both aluminum and copper feeders. Confirm the AL9CU marking stamped on the block itself for your inspector; the listing data here states the aluminum body, the 600 V rating and the UL E9809 listing.
4) Why choose a both-side 5-port block instead of a single-side multi-tap?
A both-side block puts ports on two faces, so you can bring the main in on one side and run taps out the other instead of crowding every lug onto one face. In a tight gutter or panel wireway that routing matters more than the port count. The AMTD7502505 gives five ports arranged that way, each in the 750-250 kcmil range.
5) Does the Blackburn AMTD7502505 come insulated or do I need a cover?
The connector itself is a bare aluminum block, sold each. Insulation is not part of the item, so if the installation needs a covered tap you add a separate insulating cover or boot sized to the block, or install it inside an enclosure or gutter where the terminals are guarded.
6) Is a US-made, UL listed tap connector available for a government or institutional spec job?
The Blackburn AMTD7502505 is manufactured in the United States and UL listed under E9809, which is what most federal and institutional specs look for on domestic-sourcing and listing lines. Rated 600 V, five ports, 750-250 kcmil.
7) How is the Blackburn AMTD7502505 sold, individually or in a pack?
Each. The AMTD7502505 is a single connector per unit, so a job needing a block per phase plus neutral means four units. Its UPC is 783786452545 and it is made in the United States.
How fast can I get the Blackburn AMTD7502505 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTD7502505 come with a warranty?
Absolutely. The Blackburn AMTD7502505 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTD7502505?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTD7502505 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.