You may also like
AL MULTI BOTHSIDE CONN 5PORT 250-10
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire & Cable Management
- Product Type:
- Multi-Tap/Port Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809, CSA 6591
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTD250105 – Frequently Asked Questions
1) What conductor range does the Blackburn AMTD250105 multi-tap connector accept?
The AMTD250105 is a 250-10 connector, meaning each of its ports takes conductors from 250 kcmil down to 10 AWG. That range covers typical service and feeder taps down to branch circuit wire, so one connector body handles a large main with several smaller taps off it.
2) How many ports does the Blackburn AMTD250105 have, and can wires enter from both ends?
Five ports, and it's a both-side entry design, so conductors can be landed from either end of the connector body rather than all from one face. That matters in a tight gutter or panel where you can't swing every conductor to the same side.
3) Is this Blackburn multi-tap connector UL listed and CSA certified?
It is. The AMTD250105 carries UL E9809 and CSA 6591, so it satisfies inspectors on both sides of the border for a listed tap connector.
4) Is the Blackburn AMTD250105 rated for 600 volt service?
Yes. The AMTD250105 multi-tap connector carries a 600 V rating, which covers standard commercial and industrial power distribution up to 600 volts.
5) Can I use the Blackburn AMTD250105 with both copper and aluminum conductors?
The connector body is aluminum. Aluminum-bodied mechanical taps in this class are the dual-rated style used for aluminum and copper conductors, but confirm the AL9CU marking stamped on the body before mixing metals on a job.
6) Does the Blackburn AMTD250105 come insulated or do I need a cover?
It's a bare aluminum mechanical connector, finished black, not a pre-insulated device. Insulation is done in the field, typically with a snap-on cover or tape and mastic, unless it's landed inside an enclosure where the NEC permits bare taps.
7) When should I use a 5-port multi-tap connector instead of separate split-bolt or single tap connectors?
Use a multi-tap like the AMTD250105 when one large conductor feeds several smaller ones, for example a feeder into a gutter splitting to multiple panels or motor loads. One listed device handles all five conductors with one insulation job, instead of a split bolt per tap that each need taping and take up far more room in the box. Split bolts still make sense for a single one-to-one splice.
8) Is the Blackburn AMTD250105 sold individually or in a box?
Each. The selling unit is one connector, so order the exact count you need rather than a carton quantity. It is made in the United States.
How fast can I get the Blackburn AMTD250105 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTD250105 come with a warranty?
Absolutely. The Blackburn AMTD250105 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTD250105?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTD250105 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.