You may also like
AL MULTI BOTHSIDE CONN 6PORT 250-10
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire & Cable Management
- Product Type:
- Multi-Tap/Port Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809, CSA 6591
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTD250106 – Frequently Asked Questions
1) What wire range does the Blackburn AMTD250106 multi-tap connector accept?
The AMTD250106 is a 250-10 connector, so each port takes conductors from 250 kcmil down to 10 AWG. With six ports and taps on both sides, it lets you break a feeder out to multiple branch conductors within that same range. Anything larger than 250 kcmil needs a different tap block.
2) Is this Blackburn 6-port connector rated for 600 volt service and distribution work?
Rated 600 V, so it is suitable for typical commercial feeder, panelboard, and service-entrance tap work at 600 V or less. It carries UL E9809 and CSA 6591 file listings, which matters if you are submitting the tap on a job that requires listed components.
3) Can I use the Blackburn AMTD250106 tap block with both copper and aluminum conductors?
The body is aluminum, which is the standard construction for dual-rated AL/CU mechanical tap connectors used on aluminum or copper feeders. Match the connector's stated 250 kcmil to 10 AWG range to your conductor size and use the compounding practice your inspector expects on aluminum runs.
4) What does a both-side multi-tap connector do that a single-sided tap block does not?
A both-side block has ports opening on opposite faces, so incoming and outgoing conductors can enter from either direction instead of all lining up on one side. On a crowded gutter or pull box, that is usually the difference between making your bends and not. The AMTD250106 gives you six ports total in the 250 kcmil to 10 AWG range. If every conductor approaches from the same direction, a single-sided block is simpler to dress.
5) What is the exact part number and manufacturer for this 6-port 250-10 aluminum tap connector?
Blackburn AMTD250106. That is the manufacturer part number to quote for the aluminum both-side multi-tap block with six ports rated 250 kcmil to 10 AWG at 600 V.
6) How is the Blackburn AMTD250106 sold, individually or in packs?
It is sold each, so one connector per unit ordered. Count the taps on your drawing and order accordingly rather than assuming a multi-pack.
7) Is the Blackburn AMTD250106 made in the USA for jobs with domestic sourcing requirements?
Country of origin is the United States, which is what a government, healthcare, or education procurement officer working under a domestic-preference clause needs on record for the submittal.
How fast can I get the Blackburn AMTD250106 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTD250106 come with a warranty?
Absolutely. The Blackburn AMTD250106 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTD250106?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTD250106 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.