You may also like
AL SLOTTED COMP TERM 1/0 YEL 2SLOT
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Terminal Lug Slotted Tang
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Temperature Range:
- 90 °C
- Type2:
- Wire connectors
- Voltage Rating:
- 600 V
- Wire Size:
- 1/0 STR AWG2/0 SOL AWG
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Yellow
Blackburn LAC102 – Frequently Asked Questions
1) What wire size does the Blackburn LAC102 compression lug take?
The LAC102 is sized for 1/0 AWG stranded conductor, and 2/0 AWG solid. It is a compression terminal, so it gets crimped onto the conductor with the matching die, not torqued down like a mechanical setscrew lug.
2) Can I use the Blackburn LAC102 aluminum lug on copper conductor?
It is an aluminum-body compression lug. Blackburn's AL-marked compression terminals are the aluminum line, so run it on aluminum conductor unless the lug itself carries a dual-rated AL9CU marking. If your feeder is copper, order a copper compression lug in the same 1/0 range instead.
3) Is the LAC102 a one-hole or two-hole lug?
Two slots on the tang. The slotted tang means the bolt holes are open-ended slots rather than closed holes, so it drops onto studs or a drilled bus without fully removing the hardware. Two bolt points also resist rotation on the pad, which matters on a busbar or a large equipment ground connection.
4) What is the voltage and temperature rating on the LAC102 terminal lug?
Rated 600 V and 90 degrees C. That covers standard building feeder and panelboard work with 90 C insulated conductor such as THHN/THWN-2, provided the terminations elsewhere in the circuit allow the higher ampacity column.
5) Does the yellow color on the Blackburn LAC102 mean anything or is it just paint?
Yellow is the die color code for this compression range, not insulation. The lug body itself is bare with no insulating sleeve, so if the termination needs covering in a wet or exposed location you add heat shrink or a boot separately.
6) Do I need a special crimp tool for the Blackburn LAC102?
Yes, this is a compression lug and it requires a hydraulic or battery compression tool with the die matching the color code stamped on the barrel. A mechanical setscrew lug is the alternative if you don't want to carry a crimper to the job, but compression terminations are what most utility and service spec work calls for.
7) Are Blackburn LAC102 lugs sold individually or in a bag?
Sold each, so you buy the exact count for the job. On a three-phase feeder with neutral and ground that's five per end, ten for both ends.
How fast can I get the Blackburn LAC102 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn LAC102 come with a warranty?
Absolutely. The Blackburn LAC102 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn LAC102?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn LAC102 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.