Alarm Controls NTB Series - Ba...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$157.00
$109.63

Alarm Controls NTB Series - Battery Powered No Touch Request to Exit Stations

(1 review) Write a Review

Model: NTB-1
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$157.00
$109.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Alarm Controls - Battery Powered No Touch Request to Exit Stations

The battery powered No Touch Request to
Exit Activation Switches use infrared sensors
to reliably allow safe egress or activation of
a device with a simple hand presentation.

These request to exit solutions provide greater flexibility and
control for sensitive applications, without the need to make
costly modifications, extending touch-free access and egress
in an easy and affordable way. The NTB Series is a direct
replacement for traditional “request to exit” push buttons
and can be used to quickly upgrade existing applications
to code compliant no touch solutions using existing wiring.

Features
Standard Features
• Battery or DC powered (optional)
• Low battery LED status indicator
• Wired communication
• Stainless steel with vandal resistant faceplate
• Sensor detection range up 4” for applications that require precise activation
• Built in obstruction detection
• Field-configurable bi-color (red/green) LED status indicators
• Selectable time delay 1 to 10 seconds
• Field-configurable on/off audible tones configurable via jumper
• Plate screened WAVE TO OPEN
• For use with swinging and sliding door applications

Options
• NTB-1 with single gang wall plate
• NTB-1A single gang with ADA symbol
• NTB-2 with double gang wall plate
• NTB-2A double gang with ADA symbol
• NTB-3 with narrow stile wall plate
• NTB-3A narrow stile with ADA symbol
• Available in stainless steel (standard), black (BK), and Duranodic Dark Bronze (DURO) finishes

Electrical
• DPDT relay rated 2A at 30 VDC/VAC
• 2 AA alkaline batteries (included)
• Optional 12 or 24 VDC hard-powered

Operating Temperature
• -13˚F to 131˚F [-25˚C to 55˚C]

Product Specs

Series:
NTB
Subcategory:
No Touch Sensors
Commercial/Residential:
Commercial
Temperature Range:
Minus 13F to 131F (Minus 25C to 55C)
Product Type:
No Touch Sensors
Battery Operated:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Model:
NTB
Product Voltage:
12/24 VDC
Product Category:
Electronic Access Controls
Department:
Door Hardware

Alarm Controls NTB-1 – Frequently Asked Questions

1) Can I replace an existing request-to-exit push button with a no-touch sensor using the wiring already in the wall?
That's exactly what the Alarm Controls NTB Series is built for. It's a direct replacement for traditional request to exit push buttons and works off the existing wiring, so you can convert an opening to touch-free egress without pulling new cable or cutting the wall. The relay is DPDT rated 2A at 30 VDC/VAC, so it drops into the same switched circuit a push button was handling.
2) Do I have to run power to an NTB no touch exit switch, or does it run on batteries?
Two AA alkaline batteries come with the NTB station and it runs on them out of the box, which is why it retrofits so easily where there's no power at the box. If you'd rather hard-power it, it accepts 12 or 24 VDC. Either way there's a low battery LED status indicator on the plate so maintenance sees it coming instead of finding a dead sensor.
3) Which NTB model do I order for an aluminum storefront door with a narrow stile?
The NTB-3 is the narrow stile plate, and NTB-3A is the same thing with the ADA symbol screened on. The other two plate formats are single gang (NTB-1, NTB-1A) and double gang (NTB-2, NTB-2A), which suit a standard wall box beside the opening rather than the stile itself.
4) How close does your hand have to be to trigger the Alarm Controls NTB wave sensor?
Detection range is up to 4 inches, which is deliberately short. It means someone walking past the plate or a cart brushing the wall won't fire the relay, but a hand presented at the plate will. There's also built in obstruction detection. If you want a sensor someone can trigger from across the vestibule, this is the wrong device.
5) Can I set how long the door stays released after someone waves at the switch?
Yes, the time delay is selectable from 1 to 10 seconds in the field. The bi-color red/green LED indicators are field-configurable too, and the audible tone can be switched on or off with a jumper, so you can run it silent in a healthcare corridor or a hotel floor and keep the tone on where you want feedback at the door.
6) Will an NTB no touch station hold up in an unheated garage or an exterior vestibule?
Operating range on the NTB is -13 F to 131 F (-25 C to 55 C), so parking structures, loading docks and unconditioned vestibules are within spec. The faceplate is stainless steel and vandal resistant, which is the other half of that question in a public entry.
7) Does a wave-to-open sensor like this work on sliding doors, or only swinging doors?
Both. The NTB Series is listed for swinging and sliding door applications. Since it's a dry contact device (DPDT relay, 2A at 30 VDC/VAC), it activates whatever it's wired to, an electric strike, a mag lock circuit, or a slider's automatic operator, rather than being tied to one door type.
8) What finishes do the Alarm Controls NTB exit stations come in?
Stainless steel is standard, with black (BK) and Duranodic Dark Bronze (DURO) also offered so the plate can match existing storefront or door hardware across a building. Every plate is screened WAVE TO OPEN, and the A models add the ADA symbol if you want the graphic to match accessible openings elsewhere in the facility.
9) Is the NTB with the ADA symbol a different sensor, or just a different plate?
Just the plate graphic. NTB-1A, NTB-2A and NTB-3A are the same sensor and same electronics as NTB-1, NTB-2 and NTB-3, with the ADA symbol screened onto the faceplate alongside the WAVE TO OPEN text. Pick the A version where you're marking an accessible opening and the plain version everywhere else, and they'll operate identically.
10) Is this thing rated for a commercial building or is it a residential product?
The NTB Series is a commercial device. Stainless steel vandal resistant faceplate, a DPDT relay rated 2A at 30 VDC/VAC, and a -13 F to 131 F operating range put it in schools, healthcare, offices and multi-family common areas rather than a house.
How fast can I get the Alarm Controls NTB-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Alarm Controls NTB-1 come with a warranty?
Absolutely. The Alarm Controls NTB-1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Alarm Controls NTB-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Alarm Controls NTB-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    Door switch

    Posted by R. Gonzales on Sep 10th 2026

    Website was easy to use. Great device at a fair price. Shipping was incredibly fast.