Alarm Controls RP-100 Series ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$37.41
Alarm Controls RP-100 Series - Single Remote Station Wall Plate with White Push Button

Alarm Controls RP-100 Series - Single Remote Station Wall Plate with White Push Button

(No reviews yet) Write a Review

Model: RP-100
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$37.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Alarm Controls RP-100 Series - Single Remote Station Wall Plate with White Push Button

Features
Standard Features

  • Single gang wall plate with stainless steel finish
  • White flush push button

Specifications

Dimensions

  • 2-3/4"W x 4-1/2"H

Electrical

  • N/O push button, rated .5A at 35 VDC

Product Specs

Series:
RP-09
Subcategory:
Remote Plates
Commercial/Residential:
Commercial
Product Type:
Remote Plates
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Finish:
Satin Stainless Steel
Product Category:
Electronic Access Controls
Department:
Door Hardware

Alarm Controls RP-100 – Frequently Asked Questions

1) What are the electrical ratings on the Alarm Controls RP-100 push button, and can it switch a mag lock directly?
The push button is normally open and rated 0.5A at 35 VDC. That is a low current dry contact rating, so it is meant to signal an access control panel, a timer, or a relay input, not to carry the holding current of a magnetic lock or strike directly. Run the button into your controller or a relay and let that switch the lock power.
2) Is the ACSI 1340-1 single gang plate a substitute for an RP-100 push button station?
No. The RP-100 is a single gang wall plate with a white flush N/O push button rated .5A at 35 VDC, so it is the device a person presses to release a door. The ACSI 1340-1 is a single gang wall mount indicator with one LED, red or green, from the 1340 Series - it reports status and has no button to press. If you need someone to trigger an exit or release, use the RP-100 push button plate; the 1340-1 would leave the opening with a light and no way to actuate it.
3) Is the Alarm Controls RP-100 station momentary or maintained?
It is a normally open push button, so the contact closes only while the button is pressed. That suits request-to-exit and momentary door release, where the controller or timer decides how long the door stays unlocked. If you need a latching on/off station, this is not the part.
4) What finish is the Alarm Controls RP-100 wall plate, and will it match other stainless plates in the building?
Satin stainless steel plate with a white flush push button. It is offered in that one finish only, so every RP-100 you order matches the next one. The satin stainless face sits alongside standard satin stainless device plates and 630 finish hardware without looking off.
5) Does the Alarm Controls RP-100 include the button, or do I order that separately?
The button comes on the plate. You get the single gang stainless plate with the white flush push button already fitted, so the only things you supply are the gang box or mud ring, the mounting screws for that box, and the low voltage wire back to your panel.
6) Can I pair a status indicator with a release button on adjacent single gang boxes at the same door?
Yes, and they are two separate devices. The RP-100 covers the actuation side: a single gang plate in satin stainless steel with a white flush push button, N/O and rated .5A at 35 VDC. The ACSI 1340-1 covers the annunciation side: a single gang, wall mount indicator carrying one LED in red or green. Both mount to a standard single gang opening, so a common layout is the RP-100 where the occupant reaches to release the door and the 1340-1 where the lock or door state needs to be visible.
7) Is the Alarm Controls RP-100 rated for commercial use?
Yes, the RP-100 remote station is a commercial grade device. It is a stainless single gang plate with a flush white button, the arrangement used for door release and request-to-exit stations in commercial openings rather than a residential doorbell fitting.
How fast can I get the Alarm Controls RP-100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Alarm Controls RP-100 come with a warranty?
Absolutely. The Alarm Controls RP-100 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Alarm Controls RP-100?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Alarm Controls RP-100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!