Alarm Controls RP Series - Rem...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$45.37
Alarm Controls RP Series - Remote Plates - Single Gang, Stainless Steel Wall Plate, Red and Green LEDs

Alarm Controls RP Series - Remote Plates - Single Gang, Stainless Steel Wall Plate, Red and Green LEDs

(No reviews yet) Write a Review

Model: RP-05
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$45.37
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Alarm Controls RP Series - Remote Plates - Single Gang, Stainless Steel Wall Plate, Red and Green LEDs

Product Features

  • Remote plates with illumination or LED features
  • Single gang and slimline options available
  • Options with or without hole
  • LED size and color options available

Manufacturer Resources

Product Specs

Series:
RP
Subcategory:
Remote Plates
Commercial/Residential:
Commercial
Product Type:
Remote Plates
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Plate Finish:
Satin Stainless Steel
Product Voltage:
12/24 VDC
Product Category:
Electronic Access Controls
Department:
Door Hardware

Alarm Controls RP-05 – Frequently Asked Questions

1) What is the difference between the Alarm Controls RP-04, RP-05 and RP-06 remote plates?
All three are single gang stainless steel remote plates with a 1/4 inch red and green LED pair. The difference is what mounts through the plate: RP-04 has a "D" hole cut for an Ace lock, RP-06 has a double "D" hole for a Medeco lock, and RP-05 comes with a normally open push button instead of a key switch cutout. Pick by the device you are controlling the door with: key switch for restricted release, push button for free egress or open request.
2) Does the Alarm Controls RP-04 remote plate come with the key switch?
No. The RP-04 plate is machined with a "D" hole sized for an Ace lock, and the RP-06 with a double "D" hole for a Medeco lock, but the cylinder key switch itself is a separate item you order to suit your keying. Only the RP-05 ships with its switching device, a normally open push button.
3) I need a single gang wall indicator but only one LED color, not two. What else works?
The Alarm Controls RP series remote plates carry a 1/4 inch red and green LED pair on a satin stainless steel single gang plate. If the opening only calls for one status color, the ACSI 1340-1 is a single gang wall mount indicator with a single LED in red or green. Both mount to a standard single gang box, so the choice comes down to whether you want two-state status at the plate or a single lamp.
4) Does the ACSI 1340-1 work as a drop-in for an RP-04 with the Ace lock hole?
No. The RP-04 remote plate is cut with a "D" hole to accept an Ace lock, and the RP-06 is cut with a double "D" hole for a Medeco lock. The ACSI 1340-1 is an indicator plate only, single gang wall mount with one LED, so it has no key cylinder cutout. If the opening uses a key switch through the plate, stay with the RP model that matches your cylinder; the 1340-1 suits locations where only status indication is needed.
5) What size electrical box do I need for an Alarm Controls RP remote plate?
These are single gang plates, so they mount to a standard single gang box or single gang mud ring, the same rough-in as a common wall switch.
6) I need a momentary release button at the wall plate, not just an indicator. Which one do I order?
Order the RP-05, the remote plate with a normally open push button alongside the 1/4 inch red and green LEDs on the satin stainless single gang plate, rated for 12/24 VDC. The ACSI 1340-1 is an indicator only, a single gang wall mount with one LED, so it will not give you the release input.
7) Is the Alarm Controls RP plate finish going to match the other stainless devices in a commercial corridor?
The plate is satin stainless steel, which is the usual match for satin stainless push plates, exit devices trim and switch plates in commercial corridors. It is a commercial-duty device rather than a residential decora-style plate.
8) Can I mix RP plates and ACSI 1340 indicators across the same building?
Yes, both are single gang wall mount devices, so they share the same back box prep across a facility. The Alarm Controls RP plates are the two-color option with a 1/4 inch red and green LED on a satin stainless steel face, and several models add a key cylinder cutout or a normally open push button. The ACSI 1340-1 from the 1340 series is the single LED indicator in red or green. Standardize on the RP plates where you need a control or dual status at the wall and use the 1340-1 at pure annunciation points.
How fast can I get the Alarm Controls RP-05 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Alarm Controls RP-05 come with a warranty?
Absolutely. The Alarm Controls RP-05 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Alarm Controls RP-05?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Alarm Controls RP-05 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!