Alarm Controls System Accessor...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$147.00
$132.90
Alarm Controls System Accessories - LA32 Pulsing/Steady Sounder 80dB Fits 5/8" Diameter Hole

Alarm Controls System Accessories - LA32 Pulsing/Steady Sounder 80dB Fits 5/8" Diameter Hole

(No reviews yet) Write a Review

Model: LA32
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$147.00
$132.90
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Alarm Controls System Accessories - LA32 Pulsing/Steady Sounder 80dB Fits 5/8" Diameter Hole

LA32 buzzer can be mounted in 5/8" hole on a single gang wall plate

Standard Features
• Sound level 80 dB
• Buzzer mounts in 5/8” hole on single gang wall plate
• Removable contact blocks
• Bezel shaped head made of plastic Options
• Available pre-mounted on a single gang wall plate (TS-42)
• Single gang wall plate available for self-mounting (RP-23A)

Dimensions
• Required mounting hole: 5/8"
Electrical
• Operates on 12 VDC
• Supplied with 12" wire leads

Product Specs

Subcategory:
Parts and Accessories
Commercial/Residential:
Commercial
Product Type:
Buzzer
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Category:
Electronic Access Controls
Department:
Door Hardware

Alarm Controls LA32 – Frequently Asked Questions

1) What size hole do I need to drill to mount the Alarm Controls LA32 buzzer?
The LA32 sounder drops into a 5/8 inch diameter hole, and it is sized to mount in that hole on a single gang wall plate. If you are drilling a blank plate or a piece of trim, 5/8 inch is the number to work to. Alarm Controls also sells it pre-mounted on a single gang wall plate as the TS-42, or you can buy the RP-23A single gang plate and mount it yourself.
2) What voltage does the LA32 sounder run on, and can I power it off my access control panel?
It operates on 12 VDC, which is the same supply most access control boards, mag lock power supplies, and request-to-exit circuits already run. It ships with 12 inch wire leads, so you get enough tail to land it on a terminal block inside the gang box without splicing in a pigtail.
3) Should I order the LA32 on its own or the TS-42 version?
It comes down to whether you want to do the plate work. The LA32 is the bare sounder and needs a 5/8 inch hole in whatever you are mounting it to. The TS-42 is the same sounder already mounted on a single gang wall plate, so it goes straight onto a standard single gang box with no drilling. If you have an existing plate you want to add the buzzer to, take the LA32 by itself or pair it with the RP-23A blank single gang plate.
4) How loud is the LA32 buzzer, and is 80 dB enough for a door annunciator?
Sound output is 80 dB. That is loud enough to be heard clearly in a lobby, corridor, or reception area as a door-ajar or entry annunciator, but it is not a mass notification horn. For a noisy mechanical room, loading dock, or anywhere you need alert across a large open floor, you want a higher output horn rather than a panel-mount sounder like this one.
5) Is the LA32 a steady tone or a pulsing tone?
Both. The LA32 is a pulsing/steady sounder, so it covers the two signal patterns installers usually want, a steady tone for a continuous alert like a propped door and a pulsing tone where you want the sound to stand out from background noise or distinguish one condition from another.
6) Can the contact blocks on the LA32 be serviced or swapped without pulling the whole unit?
The contact blocks are removable, so the electrical portion comes off the back rather than being sealed into the body. For an MRO or facilities crew standardizing on this sounder across a building, that means a failed block can be dealt with at the device instead of cutting the leads and replacing the whole assembly.
7) Is the LA32 sounder rated for commercial buildings or is it a residential part?
It is a commercial-duty device, sold as part of the Alarm Controls electronic access control line for door annunciation. Property managers and integrators use it behind request-to-exit stations, door-ajar circuits, and delayed egress alerts in offices, schools, and multi-family common areas. The head is a plastic bezel-shaped face that sits flush on the plate.
How fast can I get the Alarm Controls LA32 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Alarm Controls LA32 come with a warranty?
Absolutely. The Alarm Controls LA32 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Alarm Controls LA32?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Alarm Controls LA32 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!