You may also like
Metallics WAKJ19T Anchor 1/4" Ligjht Duty Super Yellow Wall Anchor Jar w/ 10 x 1 Pan Head Tri-Drive Screw w/ # 2 Square Bit USA SCREW ONLY
Model: MET-WAKJ19T
Anchor 1/4" Ligjht Duty Super Yellow Wall Anchor Jar w/ 10 x 1 Pan Head Tri-Drive Screw w/ # 2 Square Bit USA SCREW ONLY
Metallics
$92.14
$50.64
Metallics WAKJ8T Anchor 1/4" Light Duty Green Collarless Vinyl Wall Anchor Jar w/ 10 x 1 Pan Head Tri-Drive Screw w/ # 2 Square Bit USA SCREW ONLY
Model: MET-WAKJ8T
Anchor 1/4" Light Duty Green Collarless Vinyl Wall Anchor Jar w/ 10 x 1 Pan Head Tri-Drive Screw w/ # 2 Square Bit USA SCREW ONLY
Metallics
$82.89
$38.81
Anchor 1/4" Light Duty Gray Ribbed Wall Anchor Jar w/ 10 x 1 Pan Head Tri-Drive Screw w/ # 2 Square Bit USA SCREW ONLY
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics WAKJ23T – Frequently Asked Questions
1) Does the Metallics WAKJ23T come with the wall anchors, or just the screws?
Screws only. Despite the anchor-jar description, the WAKJ23T ships as the 10 x 1 pan head tri-drive screw component on its own. If you need the gray ribbed 1/4 inch anchors themselves, order the anchor part separately.
2) Are these replacement screws for 1/4 inch plastic ribbed wall anchors already in my drywall?
Yes, that's the use case. The WAKJ23T is the screw that pairs with 1/4 inch light duty gray ribbed wall anchors, so if you've got anchors set in drywall and lost or stripped the hardware, these are the matching #10 x 1 inch pan head tri-drive screws.
3) What bit do I need to drive the Metallics WAKJ23T screws?
A #2 square (Robertson) bit. The screws are a pan head tri-drive, so they'll also accept a Phillips or slotted driver, but the #2 square gives the best bite and is what Metallics calls out for these.
4) What size screw is in the Metallics WAKJ23T pack?
A #10 by 1 inch pan head screw, sized to match 1/4 inch light duty gray ribbed plastic wall anchors. If your existing anchors are a different diameter, the #10 shank may be too tight or too loose to grip.
5) Can I use these for mounting electrical device boxes or light fixtures to drywall?
Light duty only. A 1/4 inch ribbed plastic anchor with a #10 x 1 inch screw is rated for light loads in hollow wall, so it suits low-voltage plates, small raceway, cable clips and similar light electrical work. For fixtures with real weight, go to a toggle or a solid-backing fastener instead.
How fast can I get the Metallics WAKJ23T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAKJ23T come with a warranty?
Absolutely. The Metallics WAKJ23T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAKJ23T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAKJ23T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.