You may also like
Anchor 1/4 x 2-1/2" Hand Drive Pins 5 (50 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics DPL7 – Frequently Asked Questions
1) Do I need a powder actuated tool to install DPL7 drive pin anchors?
No. The DPL7 is a hand drive pin anchor, so it sets with a hammer once the hole is drilled, not with a powder actuated or gas tool. That makes it workable in occupied buildings where a powder tool is not permitted or practical.
2) What are hand drive pin anchors like the DPL7 used for on electrical work?
Hand drive pins in this 1/4 inch size are the quick fix for attaching straps, clips, boxes, and small channel or conduit supports to concrete, block, and masonry. One drilled hole, one hammer set, no threading or torquing. For anything that has to be removed and reset later, a threaded anchor is the better choice, since a drive pin is a permanent set.
3) How deep a hole do I drill for a 1/4 x 2-1/2 inch drive pin anchor?
Match the drill to the 1/4 inch anchor diameter and go deeper than the 2-1/2 inch pin length so dust at the bottom does not stop the pin short. Drilling shallow is the usual reason a hand drive pin mushrooms or stands proud of the fixture.
4) What part number do I order for the Metallics 1/4 x 2-1/2 inch hand drive pin anchor?
Order Metallics DPL7. That number covers the 1/4 x 2-1/2 inch hand drive pin anchor in the 50 piece pack.
How fast can I get the Metallics DPL7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics DPL7 come with a warranty?
Absolutely. The Metallics DPL7 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics DPL7?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics DPL7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.