You may also like
Anchor 1/4 x 2" Hand Drive Pins 50/Pa (50 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics DPL6 – Frequently Asked Questions
1) Do I need a powder actuated tool to install DPL6 drive pins?
No. The DPL6 is a hand drive pin, set with a hammer after the hole is drilled, not fired from a powder actuated or gas tool. That makes it a straightforward option for electricians anchoring straps, clips and small boxes where bringing a powder tool and its license to the job is not practical.
2) What drill bit size do I use for a 1/4 inch hand drive anchor like the DPL6?
Hand drive pin anchors are drilled at their nominal diameter, so a 1/4 inch masonry bit matches the DPL6's 1/4 inch body. Drill the hole deeper than the 2 inch pin length so drill dust at the bottom does not stop the pin from seating flush.
3) Are hand drive pins removable, or is this a permanent anchor?
Treat drive pins as permanent. Once the DPL6 is hammered home it is not intended to be backed out and reused like a sleeve or wedge anchor with a nut. If you need to take the fixture off and remount it later, use a threaded anchor instead.
4) Can I buy the Metallics DPL6 as single pieces instead of a 50 pack?
The DPL6 is sold as a 50 piece pack, which is the standard unit for this part. There is no single piece option under this number.
How fast can I get the Metallics DPL6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics DPL6 come with a warranty?
Absolutely. The Metallics DPL6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics DPL6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics DPL6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.