Metallics TS6434D Anchor 3/4 x...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$52.57
$3.39

Metallics TS6434D Anchor 3/4 x 4-3/4 Wedge Ancr St-Zn U (10 pcs)

(No reviews yet) Write a Review

Model: TS6434D
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$52.57
$3.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchor 3/4 x 4-3/4 Wedge Ancr St-Zn U (10 pcs)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics TS6434D – Frequently Asked Questions

1) Can I use Metallics TS6434D anchors in block or brick instead of poured concrete?
Wedge anchors like the TS6434D are intended for solid poured concrete. Hollow block, mortar joints, and brick do not give the expansion clip solid material to bite against. For hollow masonry, use a sleeve anchor or a screen tube with adhesive rather than a wedge anchor.
2) Are these zinc plated anchors OK for outdoor or wet locations?
The TS6434D is carbon steel with zinc plating, which is a dry, indoor-duty finish. Zinc plating gives limited corrosion protection and will rust in exterior, damp, or chemically exposed locations. For outdoor strut racks, rooftop equipment, or wash-down areas, specify a stainless steel or hot-dip galvanized wedge anchor instead.
3) Can a wedge anchor be removed or reused after it is set?
No. Once a TS6434D is driven and the nut torqued, the expansion clip is locked against the concrete and the anchor cannot be backed out intact. The usual approach is to remove the nut and washer, drive the stud flush or below the surface, and patch. Plan hole locations before setting, and if you expect to relocate equipment later, use a threaded insert or a drop-in anchor instead.
4) How many anchors come in a pack of Metallics TS6434D?
Each pack of the TS6434D is 10 pieces of the 3/4 x 4-3/4 wedge anchor. Nut and washer come assembled on the anchor, which is standard for wedge anchors, so no separate hardware is needed to set them.
5) What is the Metallics part number for the 3/4 x 4-3/4 zinc wedge anchor?
Order it as Metallics TS6434D. That designation covers the 3/4 by 4-3/4 inch steel zinc plated wedge anchor supplied 10 to a pack.
How fast can I get the Metallics TS6434D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS6434D come with a warranty?
Absolutely. The Metallics TS6434D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS6434D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS6434D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.