You may also like
Anchors 3/4 X 4-3/4 Wedge Ancr St-zn (Jar 20)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JTS6434 – Frequently Asked Questions
1) What size hole do I drill for a 3/4 inch wedge anchor like the JTS6434?
Wedge anchors drill to the same nominal size as the anchor body, so the 3/4 inch JTS6434 goes into a 3/4 inch carbide hammer-drilled hole in solid concrete. Drill the hole deeper than the planned embedment so the dust has somewhere to go, then drive the anchor through the fixture and tighten the nut to expand the clip.
2) Can I use the Metallics JTS6434 in block or brick instead of poured concrete?
No. A wedge anchor of this type is a solid-concrete fastener; the expansion clip needs dense, uncracked base material to grip. For hollow block or brick, use a sleeve anchor or a screw anchor rated for masonry instead of the 3/4 x 4-3/4 wedge anchor.
3) Is the zinc plated finish on the JTS6434 anchor okay for outdoor use?
Zinc plating is a mild-service coating. It's fine for dry interior concrete work, slab-mounted equipment, and racking inside a building. For exterior slabs, wash-down areas, or anywhere chlorides are present, step up to a hot dip galvanized or stainless wedge anchor rather than the zinc plated JTS6434.
4) What is the Metallics part number for a 3/4 x 4-3/4 zinc wedge anchor?
JTS6434 is the Metallics number for the 3/4 inch by 4-3/4 inch zinc plated steel wedge anchor, packed 20 to a jar. Quote that number when you need to match an existing anchor on site or add to an order.
5) Does the Metallics JTS6434 come with a nut and washer?
Wedge anchors of this style are supplied as an assembly, with the nut and washer on the threaded stud; the nut is what draws the cone into the expansion clip when you tighten it. No separate hardware is needed, but you do need a carbide bit sized to the anchor and a hammer drill.
How fast can I get the Metallics JTS6434 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTS6434 come with a warranty?
Absolutely. The Metallics JTS6434 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTS6434?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTS6434 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.