You may also like
Anchors 1/2 x 12" Hx Hd Lg Dia CS St-zn (Box 5)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics LCS1212 – Frequently Asked Questions
1) Is the Metallics LCS1212 anchor zinc plated carbon steel or stainless?
Carbon steel with zinc plating, not stainless. That is fine for dry interior concrete work, but for exterior or damp locations where corrosion is a concern you want a stainless or mechanically galvanized anchor instead.
2) Does the 1/2 inch LCS1212 hex head anchor need a separate sleeve or shield?
No. It is a hex head screw-type anchor in 1/2 inch diameter, driven directly into a pre-drilled hole in concrete with an impact wrench and a hex socket. There is no expansion sleeve, nut, or shield to assemble, and it can be removed and the hole reused for the same size anchor.
3) Why would I use a 12 inch long concrete anchor instead of a shorter one?
The 12 inch length on the LCS1212 is for thick standoffs, ledgers, sill plates over rigid insulation, or equipment bases where a lot of material sits between the fixture face and the concrete. Remember the usable part is embedment plus the thickness of everything you are fastening through, so measure your stack-up before choosing this over a shorter 1/2 inch anchor.
4) What drill bit size do I need for a 1/2 inch concrete screw anchor?
A 1/2 inch large-diameter concrete screw like the LCS1212 is installed in a hole drilled with the carbide bit diameter the manufacturer specifies for that anchor size, drilled deeper than your intended embedment so dust has somewhere to go, then blown clean before driving. Match the bit to the anchor's printed installation data rather than assuming the bit equals the 1/2 inch nominal size.
How fast can I get the Metallics LCS1212 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics LCS1212 come with a warranty?
Absolutely. The Metallics LCS1212 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics LCS1212?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics LCS1212 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.