You may also like
Anchors 1/2 X 14" Hx Hd Lg Dia CS St-zn (Box 5)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics LCS1214 – Frequently Asked Questions
1) Do I need an expansion shield or sleeve with the Metallics LCS1214 anchor?
No. The LCS1214 is a large diameter concrete screw anchor with a hex head, so it threads directly into a drilled hole in concrete or masonry. There is no shield, sleeve, or wedge to set, and no nut to torque down.
2) Is the zinc plated finish on this 1/2 inch anchor suitable for outdoor or wet use?
Zinc plating on the LCS1214 is a coating for general construction and interior or protected use. For permanent exterior exposure, standing water, or corrosive environments, specify a mechanically galvanized or stainless anchor instead of a zinc plated carbon steel one.
3) What is a 14 inch long 1/2 inch concrete screw anchor actually used for?
The 14 inch length on the LCS1214 is for anchoring through thick material into the concrete behind it: sill plates over rigid insulation, ledgers, heavy equipment bases, strut and rack bases, and electrical gear mounted off a wall or deck. The usable length is the overall 14 inches minus whatever thickness you are fastening through, so size the member and the required embedment together before ordering.
4) Can I drive the Metallics LCS1214 with an impact wrench, and what socket does the hex head take?
Yes, the LCS1214 has a hex head intended for driving with an impact wrench or impact driver with a socket adapter, which is how a 14 inch anchor of this diameter is normally installed. Match the socket to the head on the anchor you receive rather than the 1/2 inch body size, since on hex head concrete screws the head is larger than the shank.
5) If I am standardizing anchors across a facility, how do I order more than 5 of these?
The LCS1214 is sold by the box of 5, so quantities build in multiples of five boxes of the same 1/2 x 14 inch anchor. Ordering a single part number across a facility keeps one drill bit size, one socket, and one embedment spec for the crews.
How fast can I get the Metallics LCS1214 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics LCS1214 come with a warranty?
Absolutely. The Metallics LCS1214 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics LCS1214?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics LCS1214 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.