You may also like
Anchors 125 5/8 x 7 Wdg SS USA (Box 25)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics TS5871SSD – Frequently Asked Questions
1) Is the TS5871SSD anchor stainless steel, and can it be used outdoors or in wet areas?
Stainless steel, which is why it gets specified for exterior pads, rooftop equipment curbs, parking structures, and wash-down areas where a plain zinc-plated wedge anchor would rust and stain the concrete. Metallics lists it as US made.
2) Will a 5/8 x 7 wedge anchor work in hollow block or brick?
No. Wedge anchors like the TS5871SSD are for solid, poured concrete only. The expansion clip needs solid material around the full embedment depth to set; in hollow CMU or brick it will spin or pull. For hollow block use a sleeve anchor, a toggle, or an epoxy anchor with a screen tube instead.
3) How many anchors come in a box of Metallics TS5871SSD?
25 anchors per box. Metallics packs the 5/8 x 7 stainless wedge anchor as a box quantity, so a single order unit covers 25 holes. For a bolt layout of four per base plate, that is six plates plus one spare anchor.
4) Metallics TS5871SSD or a stainless threaded rod set in epoxy, which should I use?
The TS5871SSD mechanical wedge anchor sets immediately, so you can load it as soon as the nut is torqued, which suits equipment anchoring and handrail bases on a schedule. Adhesive anchoring with stainless rod is the better call when you are close to a slab edge or another anchor, when the concrete is cracked or low strength, or when you need an embedment the 7 inch anchor length cannot give you. Epoxy also needs cure time before load.
5) What is the Metallics part number to reorder the 5/8 x 7 stainless wedge anchor?
Order it as Metallics TS5871SSD. That is the single model on the 5/8 x 7 stainless wedge anchor, sold 25 to a box, so there is no finish or length option to specify alongside it.
6) Can I reuse a wedge anchor like the TS5871SSD if I have to move the equipment?
No. Once the TS5871SSD is set, the expansion clip is permanently engaged against the concrete and the anchor cannot be backed out and reused. If the fixture has to come off and go back, cut or grind the stud flush and drill a new hole, or plan on a threaded insert instead.
How fast can I get the Metallics TS5871SSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS5871SSD come with a warranty?
Absolutely. The Metallics TS5871SSD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS5871SSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS5871SSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.