Metallics WAKJ33 Anchors 1/4 Red Expandet Ny Ancr Kit, (Jar 50 )

The WAKJ33 is a 1/4 inch red Expandet nylon expansion anchor kit, packed 50 pieces to a jar. One part number covers the whole kit, so ordering by WAKJ33 gets you the jar as a unit rather than loose counts.

Nylon expansion anchors like the 1/4 inch red Expandet in the WAKJ33 kit are for light to medium duty fastening into masonry, block, brick and concrete, where a screw expands the sleeve against the hole wall. They are the usual pick for conduit straps, device boxes, raceway and signage. For heavy structural loads, overhead support, or anything taking shear or vibration, a steel expansion or wedge anchor is the correct part instead.

The anchor body size names the hole: a 1/4 inch red nylon anchor is drilled with a 1/4 inch masonry bit, hammer drill in rotary-hammer mode for concrete. Drill slightly deeper than the anchor length so dust at the bottom of the hole does not stop the anchor seating flush.

The WAKJ33 is sold as a kit of 1/4 inch red Expandet nylon anchors, 50 to the jar. The anchors themselves are the kit contents; confirm the screw diameter and length you need for your fixture thickness and order those separately if your job does not already have them on hand.

Yes. The 50 piece jar of 1/4 inch red nylon anchors is a van and shelf pack, one part number (WAKJ33) to reorder, which is how electrical contractors and facility MRO crews standardize their light masonry fastening rather than buying mixed loose bags.