Metallics WAKJ22 Anchors 3/16 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$87.06
$44.10

Metallics WAKJ22 Anchors 3/16 Gry Plas Wall Ancr Kit, 6 (Jar 200)

(No reviews yet) Write a Review

Model: WAKJ22
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$87.06
$44.10
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors 3/16 Gry Plas Wall Ancr Kit, 6 (Jar 200)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics WAKJ22 – Frequently Asked Questions

1) What size are the Metallics WAKJ22 plastic wall anchors, and how many come in a jar?
The Metallics WAKJ22 kit is a 3/16 inch gray plastic wall anchor kit supplied in a jar of 200. It is ordered under part number WAKJ22, so one order line covers a full jar rather than a loose count.
2) Is the WAKJ22 a jar of anchors only, or does it include the screws?
WAKJ22 is sold as a wall anchor kit, so the jar contains the 3/16 inch gray plastic anchors along with #6 screws. That matters if you are stocking a service van: one jar covers both halves of the fastener instead of pairing anchors with a separate screw box.
3) Will 3/16 inch plastic anchors hold a device box cover or low voltage plate on drywall?
Yes, for light pulls like plates, low voltage brackets, conduit straps and small enclosures on hollow drywall or plaster, which is what a 3/16 inch gray plastic anchor with a #6 screw is intended for. For heavier loads, or for anything cantilevered off the wall, step up to a toggle or a self drilling hollow wall anchor instead.
4) What size hole do I drill for a 3/16 plastic wall anchor?
A 3/16 inch plastic anchor is drilled with a 3/16 inch bit, which is how these anchors are sized, then the anchor is tapped flush and the #6 screw expands it against the back of the board. Hole size is the anchor size on this type, so no separate drill chart is needed.
5) Can these Metallics plastic anchors go into concrete or block, or drywall only?
Gray ribbed plastic anchors of this type work in both hollow wall (drywall, plaster) and solid masonry such as concrete, block and brick, provided the hole is drilled clean to depth with a masonry bit. In solid material the anchor compresses into the hole; in hollow wall it bears on the board. Either way keep the load light and use the supplied #6 screw.
How fast can I get the Metallics WAKJ22 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAKJ22 come with a warranty?
Absolutely. The Metallics WAKJ22 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAKJ22?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAKJ22 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.