You may also like
Anchors 3/16X2-3/4 Hwh Blu St-zn (Jar100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics CSH4F – Frequently Asked Questions
1) What size is the Metallics CSH4F concrete screw anchor?
The Metallics CSH4F is a 3/16 x 2-3/4 inch screw anchor with a hex washer head, in blue-coated steel zinc. The 2-3/4 inch length covers the fixture thickness plus embedment, so subtract whatever you are fastening through to know how deep it actually sets into the concrete.
2) What drill bit do I need for a 3/16 inch concrete screw anchor?
A 3/16 inch diameter screw anchor like the CSH4F installs into a 5/32 inch carbide hole in concrete or block, drilled deeper than the anchor's embedment so dust has somewhere to go. No separate shield or sleeve is needed, the anchor cuts its own thread.
3) Can I drive the Metallics CSH4F with a cordless impact driver instead of a wrench?
Yes. The hex washer head takes a 1/4 inch hex driver socket, so an impact driver handles it. The washer face spreads load against strut, conduit clamps, and sheet metal brackets without pulling through.
4) Is the blue coating on the CSH4F anchor okay for outdoor or damp locations?
The CSH4F is blue-coated steel zinc. That finish is built for dry interior and lightly damp service, typical electrical work inside a building. For sustained exterior exposure, wet locations, or treated lumber contact, move to a stainless screw anchor instead.
5) How many anchors come in a jar of Metallics CSH4F?
The CSH4F ships 100 pieces to a jar, which is the pack type for this item. That quantity suits one electrician stocking a van for conduit strap, box, and strut work rather than a bulk slab job.
6) What do electricians use a 3/16 x 2-3/4 hex head screw anchor for?
This size is the workhorse for fastening into concrete, block, and brick on electrical rough-in: one-hole and two-hole conduit straps, 4-square box mounting brackets, strut, panel backs, and device enclosures. The 2-3/4 inch length gives enough reach to get past furring or a thick bracket and still bite solid masonry.
7) Do I need to order a different anchor to match the Metallics CSH4F?
No separate parts are needed. The CSH4F is a one-piece screw anchor, model CSH4F, so there is no shield, plug, or nut to pair with it. All you add is a 5/32 inch carbide bit and a hex driver.
How fast can I get the Metallics CSH4F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics CSH4F come with a warranty?
Absolutely. The Metallics CSH4F is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics CSH4F?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics CSH4F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.