You may also like
Anchors 3/4 x 6 Hx Hd Lg Dia CS SS (Box 10)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics LCS3460SS – Frequently Asked Questions
1) What size is the Metallics LCS3460SS anchor and how many come in a box?
The LCS3460SS is a 3/4 x 6 inch hex head large diameter stainless anchor, packed 10 to a box. So one box covers ten anchor points at that diameter and length.
2) Is the LCS3460SS anchor stainless steel for outdoor or wet locations?
Yes, it's a stainless steel anchor, which is what you want for exterior pole bases, rooftop curbs, washdown areas and anything else where a plated carbon steel fastener would rust out.
3) What hole size do I drill for a 3/4 inch large diameter hex head anchor?
Match the drill to the anchor's nominal 3/4 inch diameter using the carbide bit the anchor system calls for, and drill the hole deeper than your intended 6 inch embedment so dust has somewhere to go. The 6 inch length is overall, so subtract the thickness of the fixture or base plate you're clamping to see how much embedment you actually get.
4) Can I install the LCS3460SS with an impact wrench, or does it need a torque wrench?
The hex head means it drives with a socket, so an impact wrench with the matching socket does the install. Back off to a torque wrench or hand tightening for the final seating so you don't overdrive a 3/4 inch anchor and strip the hole in the concrete.
5) Do I need separate nuts and washers with these 3/4 x 6 hex head anchors?
No separate nut is needed to develop the hold. This is a hex head anchor, meaning the head is integral and it drives down onto the fixture directly. Many installers still add a flat washer under the head to spread the load on thin base plates or slotted holes, and that washer is bought separately.
6) What is the exact part number to order for the Metallics 3/4 x 6 stainless hex head anchor?
Order Metallics LCS3460SS. The part number breaks down to the 3/4 inch diameter by 6 inch length in stainless, and it ships as a box of 10 rather than loose pieces.
How fast can I get the Metallics LCS3460SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics LCS3460SS come with a warranty?
Absolutely. The Metallics LCS3460SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics LCS3460SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics LCS3460SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.