Metallics TS3312 Anchors 3/8 X...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$53.69
$5.79

Metallics TS3312 Anchors 3/8 X 3-1/2 Wedge Ancr St-zn (Box 100)

(No reviews yet) Write a Review

Model: TS3312
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$53.69
$5.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors 3/8 X 3-1/2 Wedge Ancr St-zn (Box 100)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Box
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics TS3312 – Frequently Asked Questions

1) What size hole do I drill for a 3/8 inch wedge anchor?
A 3/8 inch wedge anchor like the TS3312 is set in a 3/8 inch carbide hammer-drill hole; wedge anchors are matched one-to-one with their nominal diameter. Drill deeper than the anchor will sit so dust clears the bottom, blow the hole out, then drive the anchor through the fixture and tighten the nut to expand the clip.
2) Can I use a wedge anchor in block or brick, or is it concrete only?
Wedge anchors are poured-concrete fasteners. The TS3312 expands a steel clip against the hole wall, which needs solid, uncracked concrete to work. In hollow block, brick, or mortar joints the clip has nothing consistent to bear on, so use a sleeve anchor or a screw anchor rated for masonry instead.
3) Is the zinc plating on the TS3312 okay for outdoor or wet locations?
The TS3312 is zinc plated carbon steel, which is a dry interior finish. For exterior slabs, parking structures, wash-down areas, or anywhere chlorides are present, step up to a stainless wedge anchor or a hot dip galvanized one.
4) Do wedge anchors come out if I need to remove the fixture later?
Not cleanly. Once a TS3312 is set, the expansion clip is permanently wedged in the hole. You can back off the nut and pull the fixture, but the anchor body stays. Standard practice is to cut or grind the stud flush, or drive it below the surface and patch. If you need a removable connection, use a female threaded insert instead.
5) Is this sold by the piece or only by the box?
The TS3312 ships as a box of 100 anchors, which is how Metallics packages this size. Nuts and washers come assembled on the studs on wedge anchors, so the box is a complete set for 100 fastening points.
How fast can I get the Metallics TS3312 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS3312 come with a warranty?
Absolutely. The Metallics TS3312 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS3312?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS3312 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.