Metallics LCS5865 Anchors 5/8 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$68.76
$25.07

Metallics LCS5865 Anchors 5/8 X 6-1/2 Hx Hd Lg Dia CS St-zn (Box 10)

(No reviews yet) Write a Review

Model: LCS5865
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$68.76
$25.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors 5/8 X 6-1/2 Hx Hd Lg Dia CS St-zn (Box 10)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Box
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics LCS5865 – Frequently Asked Questions

1) Are the LCS5865 anchors zinc plated or stainless?
Carbon steel with a zinc plating, not stainless. Zinc plated carbon steel is fine for dry interior concrete, but for exterior, wet, or corrosive exposure you want a hot dip galvanized or stainless anchor instead.
2) How many anchors come in a box of Metallics LCS5865?
They ship 10 to a box. Worth counting your hole layout before ordering, since a single box covers ten holes and base plate work usually runs four or more anchors per plate.
3) What hole size do I drill for a 5/8 inch sleeve-type concrete anchor?
The LCS5865 is a 5/8 inch large diameter anchor, and anchors of this style are drilled with a carbide bit matching the nominal anchor diameter, so a 5/8 inch hole drilled deeper than the planned embedment to take the drilling dust. Blow or vacuum the hole clean before setting.
4) Do I need a wrench or an impact to set these, and is a nut and washer included?
It's a hex head anchor, so it drives with a socket or wrench, commonly an impact wrench for 5/8 inch. The head is integral to the anchor, so there is no separate nut and washer to install, unlike a wedge anchor with a threaded stud.
5) Will a 6-1/2 inch anchor work for mounting strut or equipment to a concrete ceiling?
Only if your slab is thick enough. A 6-1/2 inch anchor needs that depth of base material behind the fixture thickness, so on a thin topping slab or a pan deck you will run out of concrete. Measure your slab and subtract the thickness of what you are fastening through before committing to this length.
How fast can I get the Metallics LCS5865 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics LCS5865 come with a warranty?
Absolutely. The Metallics LCS5865 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics LCS5865?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics LCS5865 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.