You may also like
Anchors Sprg Wing TogBt 3/16" #10 4" (Jar 50)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics J1533 – Frequently Asked Questions
1) What size hole do I need to drill for the Metallics J1533 toggle bolt?
The J1533 is a 3/16 inch spring wing toggle bolt, so the hole has to be large enough to pass the folded wings through, not just the bolt. For a 3/16 inch spring wing toggle that means a 3/4 inch hole in the hollow wall or ceiling. Drill it, fold the wings flat along the bolt, push them through, then pull back so the wings spring open against the back face before you tighten.
2) What does the #10 on the Metallics J1533 toggle bolt refer to?
The #10 is the machine screw size of the bolt that threads into the toggle wing nut on the J1533. Anything you are fastening needs a mounting hole that clears a #10 screw, and the fixture or strap you hang from it has to be rated for the load you are putting on a single hollow wall anchor.
3) Is the Metallics J1533 sold individually or in a pack?
The J1533 comes 50 pieces to a jar. The jar pack type is what makes it a van-stock or shop-bench item rather than a single-job buy, which is how most electrical and maintenance crews order toggle bolts.
4) Can I reuse a spring wing toggle bolt if I have to take the fixture down?
No. Once you back the screw out of a spring wing toggle like the J1533, the wing nut drops into the wall cavity and is gone. Plan on a fresh anchor for every re-hang, which is one reason the J1533 is stocked 50 to a jar rather than in small counts.
5) What are 3/16 inch toggle bolts typically used for on an electrical job?
This is the anchor crews reach for when hanging boxes, straps, raceway, light fixtures, and j-boxes off hollow drywall, plaster, or suspended ceiling material where there is no stud or joist to hit. Metallics catalogues the J1533 under its electrical fastener line for exactly that work. The 4 inch bolt length covers deeper assemblies that a short toggle cannot reach through.
6) How do I order the exact Metallics toggle bolt by part number?
Order it as Metallics J1533. That single manufacturer part number covers the 3/16 inch by 4 inch spring wing toggle bolt with a #10 screw, jar of 50, with no size or finish option to specify.
How fast can I get the Metallics J1533 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics J1533 come with a warranty?
Absolutely. The Metallics J1533 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics J1533?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics J1533 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.