You may also like
Anchors WDog 1-1/2 Pan Hd Bz Ph St-zn (Jar 1000)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics MWDPBZ1121M – Frequently Asked Questions
1) What is a Metallics MWDPBZ1121M wall dog anchor used for?
The MWDPBZ1121M is a 1-1/2 inch Wall Dog type anchor with a pan head and a Phillips drive, in bronze finish over zinc-plated steel. Wall Dog style anchors drive directly into drywall, plaster, wood or masonry without a separate plastic sleeve or pre-set anchor, which is why electricians and maintenance crews use them for hanging light boxes, device plates, conduit straps and similar wall-mounted items.
2) Is a 1-1/2 inch Wall Dog anchor long enough for drywall over a stud or furring?
At 1-1/2 inches of overall length, this anchor passes through 1/2 or 5/8 inch drywall and still has roughly an inch of engagement behind it, which covers drywall-only installs as well as biting into furring or a stud where one happens to line up. For thicker build-ups, such as double-layer board plus a mounted bracket, step up to a longer anchor instead.
3) How many anchors come in a jar of Metallics MWDPBZ1121M?
They ship 1000 per jar. That is the pack as sold, so it suits a shop or truck stock item rather than a single repair, and the jar keeps them contained in a gang box.
4) Do I need to drill a pilot hole or install a plastic anchor first for a Wall Dog screw anchor?
No separate plastic anchor is needed. Wall Dog fasteners are self-anchoring screws designed to be driven straight into the wall surface, which is the whole point of the design versus a conventional screw plus expansion sleeve. If you are fastening into harder substrate like brick or block, a pilot hole is normal practice for this fastener family.
5) What finish and head style does the MWDPBZ1121M anchor have, and will it blend with bronze trim?
Bronze finish over zinc-plated steel, with a pan head and Phillips drive. The pan head sits low and broad, so it holds thin plates and straps flat against the wall, and the bronze coloring is intended to blend with dark or bronze-finished fixtures and plates rather than stand out like bright zinc.
6) What is the exact part number to order these bronze Wall Dog anchors?
Order Metallics part number MWDPBZ1121M. That number covers the 1-1/2 inch bronze pan head Phillips Wall Dog anchor in the 1000-piece jar, so quoting it alone gets the right length, head and finish together.
How fast can I get the Metallics MWDPBZ1121M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MWDPBZ1121M come with a warranty?
Absolutely. The Metallics MWDPBZ1121M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MWDPBZ1121M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MWDPBZ1121M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.