You may also like
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14
Model: BLN-42514 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge steel
B-LINE
$790.83
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 12
Model: BLN-42512 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 12 gauge steel
B-LINE
$1,035.80
B-Line Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 14
Model: BLN-41514F 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge
B-LINE
$677.03
B-Line Eaton series Grip Strut four diamond plank, 144" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14
Model: BLN-42514 12 GL
Eaton B-Line series Grip Strut four diamond plank, 144" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge
B-LINE
$947.07
B-Line 41514 10 GL Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge steel
Model: BLN-41514 10 GL
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge steel
B-LINE
$707.89
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 14 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2.5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 14 gauge
- Product Height:
- 2.5 in
- Product Length Depth:
- 120 in
- Product Weight:
- 4.1 lb
- Product Width:
- 9.5 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
- Product Length:
- 120 in
B-LINE 42514F 10 GL – Frequently Asked Questions
1) What size opening does the B-Line 42514F 10 GL Grip Strut plank cover?
The 42514F 10 GL plank is a 120 inch long walkway section, 9.5 inches wide, with a 2.5 inch channel depth. So one plank spans 10 feet of run and covers just under 10 inches of walking width. For a wider catwalk or platform, lay planks side by side to build up the width you need.
2) Is this Grip Strut plank OSHA compliant for walking surfaces?
Yes. The B-Line 42514F 10 GL four diamond plank is listed as OSHA compliant and is made for safe, sturdy footing where a non-slip surface is required. The four diamond serrated openings shed liquid, mud and debris rather than holding it on the surface.
3) Can Grip Strut mill-galvanized plank be used outdoors or in a wet area?
The mill-galvanized steel finish on the 42514F 10 GL gives it zinc coating for general industrial and damp service, and the open diamond pattern drains rather than ponding water. For continuously wet, washdown or corrosive chemical environments, a heavier hot-dip galvanized or stainless plank is the better call.
4) What is the difference between a Grip Strut plank and grating with a channel?
The 42514F 10 GL is a plank, meaning the 9.5 inch walking surface is formed with 2.5 inch turned-down channel sides that act as the structural member. You set it directly on supports and fasten it down, instead of needing a separate frame under a flat grating panel. The 14 gauge steel and diamond openings do double duty as both the deck and the stiffener.
5) What part number do I order to match existing Grip Strut planks in my plant?
Order by manufacturer part number 42514F 10 GL from Eaton B-Line. That designation covers the four diamond plank at 120 inch length, 9.5 inch width, 2.5 inch channel, 14 gauge steel, mill-galvanized. If the planks already installed differ in width or channel depth, they are a different part number and will not line up flush.
6) Will Grip Strut plank work as stair tread or ramp surface?
The four diamond surface is made for footing where non-slip is required, and the same plank profile is used for walkways, platforms and ramp decking. At 120 inches long it is cut to length for shorter treads. Keep the 2.5 inch channel sides bearing on the stringer or support so the load path runs through the formed edges, not the walking surface.
How fast can I get the B-LINE 42514F 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 42514F 10 GL come with a warranty?
Absolutely. The B-LINE 42514F 10 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 42514F 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 42514F 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.