B-Line 86 SCF Eaton series other enclosure accessories, NEMA 1, ANSI 61 gray painted, Protects against contact with enclosed equipment, Steel, Type 1 screw cover, Flush mount, 16 gauge thickness

No. It carries a NEMA 1 degree of protection, which is indoor use only, guarding against personnel contact with the enclosed equipment and limited falling dirt. It offers no rain, sleet, or washdown protection. For outdoor or damp locations you need a NEMA 3R or 4 rated enclosure and cover instead.

A flush cover like the 86 SCF sets into the box opening so the face sits level with the box edge, which is what you want where the box is recessed into a wall and the cover has to finish flat against the finished surface. An overlapping cover sits on top of the box flange and stands slightly proud, which is normally used on surface mounted boxes and gives a bit more gasket or dust coverage. The 86 SCF is specified flush mount, so it is the recessed-wall choice.

Order Eaton B-Line 86 SCF. That is the manufacturer part number for the NEMA 1 Type 1 flush screw cover in ANSI 61 gray. The 86 prefix identifies the B-Line screw cover pull box family, and SCF designates screw cover, flush.

It is painted ANSI 61 gray, the standard gray used across most industrial steel enclosures and pull boxes, so it lines up visually with other ANSI 61 gear on the same wall. If your existing boxes are white, black, or stainless, it will not match.

Steel, 16 gauge, weighing 1.128 lb. At that gauge it stays rigid over a 7.5 inch span, so it will not bow or oil-can when the screws are drawn down, and it takes a scuff in a mechanical room better than a plastic cover.