B-Line BCTS2-36 SS6 Eaton seri...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$534.30
B-Line BCTS2-36 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 400 lbs, 36" 300 lbs load cap, Steel, Safety factor of 3,BCTS2 series,Stainless steel type 316, 2" max conduit size, 12 conduit ho

B-Line BCTS2-36 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 400 lbs, 36" 300 lbs load cap, Steel, Safety factor of 3,BCTS2 series,Stainless steel type 316, 2" max conduit size, 12 conduit ho

(No reviews yet) Write a Review

Model: BCTS2-36 SS6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$534.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 400 lbs, 36" 300 lbs load cap, Steel, Safety factor of 3,BCTS2 series,Stainless steel type 316, 2" max conduit size, 12 conduit holes

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Conduit Pipe Size Max:
2 in
Load Capacity:
24" 400 lbs, 36" 300 lbs
Number Of Conduits Pipes:
12
Product Height:
1.313 in
Product Length Depth:
38 in
Product Weight:
2.55 lb
Product Width:
3.625 in
Special Features:
Safety factor of 3
Department:
Electrical
Product Type:
BCTS2 series
Product Finish:
Stainless steel type 316
Product Details:
BCTS2 series
Product Material:
Steel
Product Length:
38 in
Application:
Support runs of conduit/pipe on same elevation

B-LINE BCTS2-36 SS6 – Frequently Asked Questions

1) How many conduits will the B-Line BCTS2-36 SS6 trapeze strut hold, and what size?
The BCTS2-36 SS6 has 12 conduit holes and takes conduit or pipe up to 2 inches. It is built to carry a run of conduit all at one elevation rather than stacking, so you get a single horizontal row of up to twelve lines off one support.
2) How much weight can the 36 inch B-Line BCTS2 trapeze support hold?
At the 36 inch length the rating is 300 lbs; the shorter 24 inch version of the BCTS2 is rated 400 lbs. Both figures are published with a safety factor of 3 already applied. Size your run so the total conduit, wire fill and any future adds stay under 300 lbs on the 36.
3) Is the BCTS2-36 SS6 suitable for outdoor, coastal or wash-down electrical work?
Yes. The SS6 suffix is Type 316 stainless, which is the grade specified where chlorides are present, coastal exposure, water treatment plants, food processing and wash-down areas. If the job is dry indoor commercial, a plain or galvanized finish would normally be specified instead.
4) Is this B-Line conduit trapeze UL Listed for an inspected commercial job?
The BCTS2 series conduit trapeze is UL Listed, which is generally what an electrical inspector wants to see on a supporting device in a commercial or institutional install.
5) Do I still need individual pipe straps if I use the BCTS2 conduit trapeze?
No. The BCTS2 is a one-piece support with the conduit holes already punched, so the conduit drops into the holes instead of being strapped to a length of strut. That is the difference against a conventional strut-and-clamp trapeze: fewer pieces to buy and no per-conduit clamp, but the hole spacing is fixed, so your conduit layout has to suit the punched pattern.
6) Should I order the 24 inch or the 36 inch BCTS2?
Pick by conduit count first, then load. The 36 inch gives the longer span for a wider bank of runs but derates to 300 lbs, while the 24 inch carries 400 lbs over the shorter span. Heavy runs of larger conduit on a tight bank favor the 24; a wider spread of smaller conduit favors the 36. Either way, 2 inch is the largest conduit the BCTS2 accepts.
7) What is the exact part number to quote for the 316 stainless 36 inch B-Line conduit trapeze?
Order it as Eaton B-Line BCTS2-36 SS6. BCTS2 is the series, 36 the nominal length, and SS6 the Type 316 stainless material code.
How fast can I get the B-LINE BCTS2-36 SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCTS2-36 SS6 come with a warranty?
Absolutely. The B-LINE BCTS2-36 SS6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCTS2-36 SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCTS2-36 SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!