B-Line Eaton series all thread...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$480.29
B-Line Eaton series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Angle bracket fasteners, 0.38"-16 rod

B-Line Eaton series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Angle bracket fasteners, 0.38"-16 rod

(No reviews yet) Write a Review

Model: BH6-H7
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$480.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Angle bracket fasteners, 0.38"-16 rod size, 160 lbs load capacity

Manufacturer Resources

Product Specs

Certifications:
UL/CUL listed
Product Height:
1 in
Product Length Depth:
1 in
Product Weight:
.062 lb
Product Width:
1 in
Department:
Electrical
Product Finish:
Plain
Product Size:
3/8 inch - 16 thread size
Product Material:
Steel

B-LINE BH6-H7 – Frequently Asked Questions

1) What rod size does the B-Line BH6-H7 hanger take?
The BH6-H7 hanger is threaded for 3/8 inch-16 rod, which is the standard rod size for most commercial electrical and conduit hanging. It will not accept 1/4-20 or 1/2-13 rod, so if the existing rod in the building is a different diameter you need a different hanger.
2) How much weight can the B-Line BH6-H7 threaded rod hanger hold?
Rated at 160 lbs load capacity. That covers typical runs of conduit, cable tray drops, and light suspended equipment on a single 3/8-16 rod point. For heavier assemblies, spread the load across more hanger points or step up to a heavier support.
3) Is the B-Line BH6-H7 hanger UL listed for electrical work?
Yes, it carries a UL/CUL listing, which is what inspectors and institutional specs typically require for supports in an electrical installation. The Canadian CUL side means it is acceptable for work north of the border as well.
4) What material and finish is the BH6-H7 hanger, and can I use it outdoors?
Steel with a plain (unfinished) surface. Plain steel has no protective coating, so it is intended for dry interior use. For damp, exterior, or corrosive locations, specify a galvanized or stainless support instead of the plain finish.
5) Do I get the threaded rod with the B-Line BH6-H7, or do I order that separately?
The BH6-H7 is the hanger fitting only. The 3/8-16 rod, along with any nuts, washers, or anchors for the structural attachment, is bought separately and cut to the drop length you need.
6) Is the BH6-H7 an angle bracket type fastener?
Yes, it is described as an angle bracket fastener within the Eaton B-Line all threaded rod and drop wire support family. It attaches to angle or bracket steel and gives you a 3/8-16 threaded point to hang a rod or wire drop from, rather than clamping onto a beam flange like a beam clamp does.
7) What is the exact part number to order for this B-Line drop wire support hanger?
Order Eaton B-Line model BH6-H7. That is the single model on the line, so there are no finish or size suffixes to add, it ships as the plain steel 3/8-16 version.
How fast can I get the B-LINE BH6-H7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BH6-H7 come with a warranty?
Absolutely. The B-LINE BH6-H7 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BH6-H7?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BH6-H7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!