B-Line Eaton series all thread...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$448.13
B-Line Eaton series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Angle bracket fasteners, 0.25"-20 or 0

B-Line Eaton series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Angle bracket fasteners, 0.25"-20 or 0

(No reviews yet) Write a Review

Model: BH5-H7
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$448.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Angle bracket fasteners, 0.25"-20 or 0.38"-16 rod size, 160 lbs load capacity

Manufacturer Resources

Product Specs

Certifications:
UL/CUL listed
Load Capacity:
16 lbs
Product Category:
Hangers
Product Height:
1 in
Product Length Depth:
1 in
Product Weight:
.062 lb
Product Width:
1 in
Department:
Electrical
Product Group:
Mounting Hardware
Product Subgroup:
Brackets
Product Type:
Angle bracket fasteners
Product Details:
Angle bracket fasteners

B-LINE BH5-H7 – Frequently Asked Questions

1) What rod sizes does the B-Line BH5-H7 angle bracket fastener accept?
The BH5-H7 takes either 1/4-20 or 3/8-16 threaded rod, so one part covers both of the common hanger rod sizes used for electrical and low-voltage drops. Order the rod separately; the bracket is the fastener only.
2) Is the B-Line BH5-H7 hanger UL listed for electrical work?
Yes, the BH5-H7 is UL/CUL listed, which is what an institutional or MRO spec usually calls for on a support used in an electrical installation.
3) What is the B-Line BH5-H7 actually used for on a job?
It is an angle bracket fastener from the Eaton B-Line all threaded rod and drop wire support line, used to terminate or anchor a hanger drop where a rod or wire has to turn into a structural attachment point. Typical use is suspending light fixtures, raceway, cable tray drops, and similar overhead electrical loads.
4) Does the B-Line BH5-H7 come with the threaded rod, nuts, or anchors?
No. The BH5-H7 is the angle bracket fastener by itself. You supply the 1/4-20 or 3/8-16 rod to suit, plus the nuts and whatever structural anchor the deck or joist requires.
5) Can I standardize on one hanger fastener across a building that uses both 1/4 inch and 3/8 inch rod?
Yes, and that is the practical reason to stock this one. Because the BH5-H7 accepts 1/4-20 and 3/8-16 rod, a facility or property maintenance crew can carry a single part number instead of two, and it is UL/CUL listed for electrical support use.
How fast can I get the B-LINE BH5-H7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BH5-H7 come with a warranty?
Absolutely. The B-LINE BH5-H7 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BH5-H7?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BH5-H7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!