You may also like
Eaton B-Line series beam clamps, Beam clamp, 1-5/8", 1" beam thickness, 14-7/8" flange width, Electro-plated zinc
Manufacturer Resources
Product Specs
- Beam Flange Width:
- 14.875 in
- Beam Thickness:
- 1 in
- Certifications:
- cULus Listed
- Product Height:
- 5 in
- Product Length Depth:
- 12 in
- Product Weight:
- 1.41 lb
- Product Width:
- 3 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
B-LINE B760-22A-J12ZN – Frequently Asked Questions
1) What size beam flange will the B-Line B760-22A-J12ZN beam clamp fit?
The B760-22A-J12ZN is built for a beam flange up to 14-7/8 inches wide with a flange thickness of 1 inch. That is a wide-flange structural beam, not a small bar joist, so measure the flange across and its thickness at the clamping point before ordering. If your flange is thicker than 1 inch or wider than 14-7/8 inches, this clamp is the wrong one.
2) Is the Eaton B-Line B760 beam clamp cULus Listed for electrical support work?
Yes, the B760-22A-J12ZN beam clamp is cULus Listed, which is what inspectors look for when it is carrying conduit, cable tray, or strut in a commercial electrical installation.
3) Will this B-Line beam clamp work with 1-5/8 inch strut channel?
Yes. The B760-22A-J12ZN is sized for 1-5/8 inch channel, so it mounts standard 1-5/8 inch strut to the beam flange for hanging conduit racks, trapeze supports, or cable tray.
4) What finish does the B760-22A-J12ZN come in, and can it go outdoors?
Electro-plated zinc. That is an indoor, dry-location finish. For exterior runs, parking structures, or wash-down areas, specify a hot dip galvanized or stainless version instead.
5) Do I have to drill or weld the steel to use this clamp?
No. The B760 series is a beam clamp, so it grips the flange mechanically and leaves the structural steel untouched. That keeps it acceptable on jobs where drilling or welding to the building steel is prohibited by the structural engineer.
6) What is the exact part number to order for this Eaton B-Line beam clamp?
Order Eaton B-Line part number B760-22A-J12ZN. That single number covers the 1-5/8 inch, 1 inch beam thickness, 14-7/8 inch flange width clamp in electro-plated zinc.
7) How big is this beam clamp and how much does it weigh?
The clamp assembly measures 12 x 5 x 3 inches and weighs 1.41 lb. Useful to know when you are figuring dead load on a long trapeze run or estimating a pallet of them for a job.
How fast can I get the B-LINE B760-22A-J12ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B760-22A-J12ZN come with a warranty?
Absolutely. The B-LINE B760-22A-J12ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B760-22A-J12ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B760-22A-J12ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.