You may also like
Eaton B-Line series beam clamps, Beam clamp, 1-5/8", 1" beam thickness, 9"-11-7/8" flange width, Electro-plated zinc
Manufacturer Resources
Product Specs
- Beam Thickness:
- 1 in
- Certifications:
- cULus Listed
- Product Height:
- 5 in
- Product Length Depth:
- 9 in
- Product Weight:
- 1.35 lb
- Product Width:
- 3 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
B-LINE B760-22A-J9ZN – Frequently Asked Questions
1) What flange width does the B-Line B760-22A-J9ZN beam clamp cover?
The B-Line B760-22A-J9ZN is sized for beam flange widths from 9 inches up to 11-7/8 inches, so it spans the wide-flange range you find on heavier structural steel. If your flange measures under 9 inches, this size will not close on it and you need a shorter clamp from the same series.
2) How thick a beam flange will this B-Line beam clamp take?
It is rated for a 1 inch beam thickness, meaning the flange it grips can be up to 1 inch thick. Combined with the 9 to 11-7/8 inch flange width range, this is a clamp for structural wide-flange steel rather than light bar joist.
3) Is this beam clamp listed for electrical support work?
Yes, the B760 series beam clamp is cULus Listed, so it is acceptable for use supporting electrical raceway and equipment where a listed support is called for by an inspector or spec.
4) Will this clamp work with 1-5/8 inch strut channel?
Yes. This is the 1-5/8 inch version of the B760 beam clamp, so it mates with standard 1-5/8 inch channel, the common Unistrut/B-Line strut profile used for trapeze and pipe runs.
5) What are the physical dimensions and weight of the B760-22A-J9ZN clamp, for a submittal?
Published figures are 9 inches length/depth, 5 inches height, 3 inches width, and 1.35 lb each. Those numbers matter when you are checking clearance between the beam flange and a ceiling grid or duct running tight beneath the steel.
6) Is the electro-plated zinc finish on this beam clamp OK outdoors?
Electro-plated zinc is an indoor, dry-location finish. It handles normal interior building environments fine, but for exterior, wash-down, or corrosive areas you want a hot-dip galvanized or stainless beam clamp instead.
7) Do I need to weld or drill the beam to use this?
No. A beam clamp like the B760 grips the flange mechanically, so no drilling, welding, or coring of the structural steel is required, which is usually what the structural engineer and the building owner want. It is the standard way to hang strut, conduit, and pipe from exposed steel.
8) How many of these B-Line beam clamps do I need for a strut trapeze hanger?
A trapeze is normally hung on two points, so plan on one clamp per rod or per attachment point, meaning two of the 1-5/8 inch B760 clamps per trapeze. Order per the beam width at each location, since this size only covers 9 to 11-7/8 inch flanges.
How fast can I get the B-LINE B760-22A-J9ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B760-22A-J9ZN come with a warranty?
Absolutely. The B-LINE B760-22A-J9ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B760-22A-J9ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B760-22A-J9ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.